Sync index.md #5
Conversation
content/index.md
Outdated
| ## Installation & Bootloader | ||
|
|
||
| To use AM32 firmware on a blank ESC, a bootloader must first be installed using a ST-LINK. Choose the bootloader that matches the signal input pin of the ESC. | ||
| To use AM32 firmware on a blank ESC, a bootloader must first be installed using an ST-LINK, GD-LINK , CMIS-DAP or AT-LINK. THe bootloader will be dependant on the MCU used ont he esc . Choose the bootloader that matches the MCU type and signal input pin of the ESC. |
There was a problem hiding this comment.
also J-Link or any other cmsis capable debug probe. Even a cmsis-dap flashed pico will do!
content/index.md
Outdated
| To use AM32 firmware on a blank ESC, a bootloader must first be installed using an ST-LINK, GD-LINK , CMIS-DAP or AT-LINK. THe bootloader will be dependant on the MCU used ont he esc . Choose the bootloader that matches the MCU type and signal input pin of the ESC. | ||
| The compatibility chart has the bootloader pinouts listed. | ||
| Current bootloaders can be found [here](https://github.com/AlkaMotors/AM32_Bootloader_F051/releases/tag/V6). | ||
| Current bootloaders can be found [here](https://github.com/AlkaMotors/AM32_Bootloader_F051/tree/main/Bootloaders). |
There was a problem hiding this comment.
also available at am32.ca/downloads
content/index.md
Outdated
|
|
||
| ## Contributors | ||
| A big thanks to all those who contributed time, advice and code to the AM32 project.\ | ||
| Un!t\ |
There was a problem hiding this comment.
Eike Ahmels (un!t) (thank you! 🙈 )
|
@freasy is it possible to link somehow this file from AM32 repo so no need to sync this? |
look at the development branch, its all changed there :D so your next task would be, to implement these changes to that branch 🙈 |
I won't be near to computer for a week, can you do it? Edit: I got home, will do it soon. |
Sync with AM32 README.md