drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP

Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon

@@ -124,3 +124,27 @@ Contact:	[email protected]
 Description:	RO. VRAM temperature in millidegree Celsius.
 
 		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan1_input
+Date:		March 2025
+KernelVersion:	6.14
+Contact:	[email protected]
+Description:	RO. Fan 1 speed in RPM.
+
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan2_input
+Date:		March 2025
+KernelVersion:	6.14
+Contact:	[email protected]
+Description:	RO. Fan 2 speed in RPM.
+
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/fan3_input
+Date:		March 2025
+KernelVersion:	6.14
+Contact:	[email protected]
+Description:	RO. Fan 3 speed in RPM.
+
+		Only supported for particular Intel Xe graphics platforms.

Documentation/gpu/xe/index.rst

@@ -25,3 +25,4 @@ DG2, etc is provided to prototype the driver.
    xe_debugging
    xe_devcoredump
    xe-drm-usage-stats.rst
+   xe_configfs

Documentation/gpu/xe/xe_configfs.rst

@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. _xe_configfs:
+
+============
+Xe Configfs
+============
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_configfs.c
+   :doc: Xe Configfs

Documentation/gpu/xe/xe_pcode.rst

@@ -12,3 +12,10 @@ Internal API
 
 .. kernel-doc:: drivers/gpu/drm/xe/xe_pcode.c
    :internal:
+
+==================
+Boot Survivability
+==================
+
+.. kernel-doc:: drivers/gpu/drm/xe/xe_survivability_mode.c
+   :doc: Xe Boot Survivability

MAINTAINERS

@@ -11918,13 +11918,10 @@ F:	drivers/gpio/gpio-tangier.c
 F:	drivers/gpio/gpio-tangier.h
 
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
-M:	Zhenyu Wang <[email protected]>
-M:	Zhi Wang <[email protected]>
-L:	[email protected]
-L:	[email protected]
-S:	Supported
+R:	Zhenyu Wang <[email protected]>
+R:	Zhi Wang <[email protected]>
+S:	Odd Fixes
 W:	https://github.com/intel/gvt-linux/wiki
-T:	git https://github.com/intel/gvt-linux.git
 F:	drivers/gpu/drm/i915/gvt/
 
 INTEL HID EVENT DRIVER

drivers/accel/ivpu/ivpu_debugfs.c

@@ -332,7 +332,7 @@ ivpu_force_recovery_fn(struct file *file, const char __user *user_buf, size_t si
 		return -EINVAL;
 
 	ret = ivpu_rpm_get(vdev);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	ivpu_pm_trigger_recovery(vdev, "debugfs");
@@ -383,7 +383,7 @@ static int dct_active_set(void *data, u64 active_percent)
 		return -EINVAL;
 
 	ret = ivpu_rpm_get(vdev);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	if (active_percent)

drivers/accel/ivpu/ivpu_drv.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2020-2024 Intel Corporation
+ * Copyright (C) 2020-2025 Intel Corporation
  */
 
 #include <linux/firmware.h>
@@ -164,7 +164,7 @@ static int ivpu_get_param_ioctl(struct drm_device *dev, void *data, struct drm_f
 		args->value = vdev->platform;
 		break;
 	case DRM_IVPU_PARAM_CORE_CLOCK_RATE:
-		args->value = ivpu_hw_ratio_to_freq(vdev, vdev->hw->pll.max_ratio);
+		args->value = ivpu_hw_dpu_max_freq_get(vdev);
 		break;
 	case DRM_IVPU_PARAM_NUM_CONTEXTS:
 		args->value = ivpu_get_context_count(vdev);
@@ -421,9 +421,9 @@ void ivpu_prepare_for_reset(struct ivpu_device *vdev)
 {
 	ivpu_hw_irq_disable(vdev);
 	disable_irq(vdev->irq);
-	cancel_work_sync(&vdev->irq_ipc_work);
-	cancel_work_sync(&vdev->irq_dct_work);
-	cancel_work_sync(&vdev->context_abort_work);
+	flush_work(&vdev->irq_ipc_work);
+	flush_work(&vdev->irq_dct_work);
+	flush_work(&vdev->context_abort_work);
 	ivpu_ipc_disable(vdev);
 	ivpu_mmu_disable(vdev);
 }

drivers/accel/ivpu/ivpu_fw.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2020-2024 Intel Corporation
+ * Copyright (C) 2020-2025 Intel Corporation
  */
 
 #include <linux/firmware.h>
@@ -233,10 +233,20 @@ static int ivpu_fw_parse(struct ivpu_device *vdev)
 	fw->dvfs_mode = 0;
 
 	fw->sched_mode = ivpu_fw_sched_mode_select(vdev, fw_hdr);
-	fw->primary_preempt_buf_size = fw_hdr->preemption_buffer_1_size;
-	fw->secondary_preempt_buf_size = fw_hdr->preemption_buffer_2_size;
 	ivpu_info(vdev, "Scheduler mode: %s\n", fw->sched_mode ? "HW" : "OS");
 
+	if (fw_hdr->preemption_buffer_1_max_size)
+		fw->primary_preempt_buf_size = fw_hdr->preemption_buffer_1_max_size;
+	else
+		fw->primary_preempt_buf_size = fw_hdr->preemption_buffer_1_size;
+
+	if (fw_hdr->preemption_buffer_2_max_size)
+		fw->secondary_preempt_buf_size = fw_hdr->preemption_buffer_2_max_size;
+	else
+		fw->secondary_preempt_buf_size = fw_hdr->preemption_buffer_2_size;
+	ivpu_dbg(vdev, FW_BOOT, "Preemption buffer sizes: primary %u, secondary %u\n",
+		 fw->primary_preempt_buf_size, fw->secondary_preempt_buf_size);
+
 	if (fw_hdr->ro_section_start_address && !is_within_range(fw_hdr->ro_section_start_address,
 								 fw_hdr->ro_section_size,
 								 fw_hdr->image_load_address,
@@ -566,7 +576,6 @@ void ivpu_fw_boot_params_setup(struct ivpu_device *vdev, struct vpu_boot_params
 
 	boot_params->magic = VPU_BOOT_PARAMS_MAGIC;
 	boot_params->vpu_id = to_pci_dev(vdev->drm.dev)->bus->number;
-	boot_params->frequency = ivpu_hw_pll_freq_get(vdev);
 
 	/*
 	 * This param is a debug firmware feature.  It switches default clock

drivers/accel/ivpu/ivpu_hw.h

@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (C) 2020-2024 Intel Corporation
+ * Copyright (C) 2020-2025 Intel Corporation
  */
 
 #ifndef __IVPU_HW_H__
@@ -82,19 +82,19 @@ static inline u64 ivpu_hw_range_size(const struct ivpu_addr_range *range)
 	return range->end - range->start;
 }
 
-static inline u32 ivpu_hw_ratio_to_freq(struct ivpu_device *vdev, u32 ratio)
+static inline u32 ivpu_hw_dpu_max_freq_get(struct ivpu_device *vdev)
 {
-	return ivpu_hw_btrs_ratio_to_freq(vdev, ratio);
+	return ivpu_hw_btrs_dpu_max_freq_get(vdev);
 }
 
-static inline void ivpu_hw_irq_clear(struct ivpu_device *vdev)
+static inline u32 ivpu_hw_dpu_freq_get(struct ivpu_device *vdev)
 {
-	ivpu_hw_ip_irq_clear(vdev);
+	return ivpu_hw_btrs_dpu_freq_get(vdev);
 }
 
-static inline u32 ivpu_hw_pll_freq_get(struct ivpu_device *vdev)
+static inline void ivpu_hw_irq_clear(struct ivpu_device *vdev)
 {
-	return ivpu_hw_btrs_pll_freq_get(vdev);
+	ivpu_hw_ip_irq_clear(vdev);
 }
 
 static inline u32 ivpu_hw_profiling_freq_get(struct ivpu_device *vdev)

drivers/accel/ivpu/ivpu_hw_btrs.c

@@ -1,8 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2020-2024 Intel Corporation
+ * Copyright (C) 2020-2025 Intel Corporation
  */
 
+#include <linux/units.h>
+
 #include "ivpu_drv.h"
 #include "ivpu_hw.h"
 #include "ivpu_hw_btrs.h"
@@ -28,17 +30,13 @@
 
 #define BTRS_LNL_ALL_IRQ_MASK ((u32)-1)
 
-#define BTRS_MTL_WP_CONFIG_1_TILE_5_3_RATIO WP_CONFIG(MTL_CONFIG_1_TILE, MTL_PLL_RATIO_5_3)
-#define BTRS_MTL_WP_CONFIG_1_TILE_4_3_RATIO WP_CONFIG(MTL_CONFIG_1_TILE, MTL_PLL_RATIO_4_3)
-#define BTRS_MTL_WP_CONFIG_2_TILE_5_3_RATIO WP_CONFIG(MTL_CONFIG_2_TILE, MTL_PLL_RATIO_5_3)
-#define BTRS_MTL_WP_CONFIG_2_TILE_4_3_RATIO WP_CONFIG(MTL_CONFIG_2_TILE, MTL_PLL_RATIO_4_3)
-#define BTRS_MTL_WP_CONFIG_0_TILE_PLL_OFF   WP_CONFIG(0, 0)
 
 #define PLL_CDYN_DEFAULT               0x80
 #define PLL_EPP_DEFAULT                0x80
 #define PLL_CONFIG_DEFAULT             0x0
-#define PLL_SIMULATION_FREQ            10000000
-#define PLL_REF_CLK_FREQ               50000000
+#define PLL_REF_CLK_FREQ               50000000ull
+#define PLL_RATIO_TO_FREQ(x)           ((x) * PLL_REF_CLK_FREQ)
+
 #define PLL_TIMEOUT_US		       (1500 * USEC_PER_MSEC)
 #define IDLE_TIMEOUT_US		       (5 * USEC_PER_MSEC)
 #define TIMEOUT_US                     (150 * USEC_PER_MSEC)
@@ -62,6 +60,8 @@
 #define DCT_ENABLE                     0x1
 #define DCT_DISABLE                    0x0
 
+static u32 pll_ratio_to_dpu_freq(struct ivpu_device *vdev, u32 ratio);
+
 int ivpu_hw_btrs_irqs_clear_with_0_mtl(struct ivpu_device *vdev)
 {
 	REGB_WR32(VPU_HW_BTRS_MTL_INTERRUPT_STAT, BTRS_MTL_ALL_IRQ_MASK);
@@ -156,7 +156,7 @@ static int info_init_mtl(struct ivpu_device *vdev)
 
 	hw->tile_fuse = BTRS_MTL_TILE_FUSE_ENABLE_BOTH;
 	hw->sku = BTRS_MTL_TILE_SKU_BOTH;
-	hw->config = BTRS_MTL_WP_CONFIG_2_TILE_4_3_RATIO;
+	hw->config = WP_CONFIG(MTL_CONFIG_2_TILE, MTL_PLL_RATIO_4_3);
 
 	return 0;
 }
@@ -334,8 +334,8 @@ int ivpu_hw_btrs_wp_drive(struct ivpu_device *vdev, bool enable)
 
 	prepare_wp_request(vdev, &wp, enable);
 
-	ivpu_dbg(vdev, PM, "PLL workpoint request: %u Hz, config: 0x%x, epp: 0x%x, cdyn: 0x%x\n",
-		 PLL_RATIO_TO_FREQ(wp.target), wp.cfg, wp.epp, wp.cdyn);
+	ivpu_dbg(vdev, PM, "PLL workpoint request: %lu MHz, config: 0x%x, epp: 0x%x, cdyn: 0x%x\n",
+		 pll_ratio_to_dpu_freq(vdev, wp.target) / HZ_PER_MHZ, wp.cfg, wp.epp, wp.cdyn);
 
 	ret = wp_request_send(vdev, &wp);
 	if (ret) {
@@ -573,6 +573,47 @@ int ivpu_hw_btrs_wait_for_idle(struct ivpu_device *vdev)
 		return REGB_POLL_FLD(VPU_HW_BTRS_LNL_VPU_STATUS, IDLE, 0x1, IDLE_TIMEOUT_US);
 }
 
+static u32 pll_config_get_mtl(struct ivpu_device *vdev)
+{
+	return REGB_RD32(VPU_HW_BTRS_MTL_CURRENT_PLL);
+}
+
+static u32 pll_config_get_lnl(struct ivpu_device *vdev)
+{
+	return REGB_RD32(VPU_HW_BTRS_LNL_PLL_FREQ);
+}
+
+static u32 pll_ratio_to_dpu_freq_mtl(u16 ratio)
+{
+	return (PLL_RATIO_TO_FREQ(ratio) * 2) / 3;
+}
+
+static u32 pll_ratio_to_dpu_freq_lnl(u16 ratio)
+{
+	return PLL_RATIO_TO_FREQ(ratio) / 2;
+}
+
+static u32 pll_ratio_to_dpu_freq(struct ivpu_device *vdev, u32 ratio)
+{
+	if (ivpu_hw_btrs_gen(vdev) == IVPU_HW_BTRS_MTL)
+		return pll_ratio_to_dpu_freq_mtl(ratio);
+	else
+		return pll_ratio_to_dpu_freq_lnl(ratio);
+}
+
+u32 ivpu_hw_btrs_dpu_max_freq_get(struct ivpu_device *vdev)
+{
+	return pll_ratio_to_dpu_freq(vdev, vdev->hw->pll.max_ratio);
+}
+
+u32 ivpu_hw_btrs_dpu_freq_get(struct ivpu_device *vdev)
+{
+	if (ivpu_hw_btrs_gen(vdev) == IVPU_HW_BTRS_MTL)
+		return pll_ratio_to_dpu_freq_mtl(pll_config_get_mtl(vdev));
+	else
+		return pll_ratio_to_dpu_freq_lnl(pll_config_get_lnl(vdev));
+}
+
 /* Handler for IRQs from Buttress core (irqB) */
 bool ivpu_hw_btrs_irq_handler_mtl(struct ivpu_device *vdev, int irq)
 {
@@ -582,9 +623,12 @@ bool ivpu_hw_btrs_irq_handler_mtl(struct ivpu_device *vdev, int irq)
 	if (!status)
 		return false;
 
-	if (REG_TEST_FLD(VPU_HW_BTRS_MTL_INTERRUPT_STAT, FREQ_CHANGE, status))
-		ivpu_dbg(vdev, IRQ, "FREQ_CHANGE irq: %08x",
-			 REGB_RD32(VPU_HW_BTRS_MTL_CURRENT_PLL));
+	if (REG_TEST_FLD(VPU_HW_BTRS_MTL_INTERRUPT_STAT, FREQ_CHANGE, status)) {
+		u32 pll = pll_config_get_mtl(vdev);
+
+		ivpu_dbg(vdev, IRQ, "FREQ_CHANGE irq, wp %08x, %lu MHz",
+			 pll, pll_ratio_to_dpu_freq_mtl(pll) / HZ_PER_MHZ);
+	}
 
 	if (REG_TEST_FLD(VPU_HW_BTRS_MTL_INTERRUPT_STAT, ATS_ERR, status)) {
 		ivpu_err(vdev, "ATS_ERR irq 0x%016llx", REGB_RD64(VPU_HW_BTRS_MTL_ATS_ERR_LOG_0));
@@ -633,8 +677,12 @@ bool ivpu_hw_btrs_irq_handler_lnl(struct ivpu_device *vdev, int irq)
 		queue_work(system_wq, &vdev->irq_dct_work);
 	}
 
-	if (REG_TEST_FLD(VPU_HW_BTRS_LNL_INTERRUPT_STAT, FREQ_CHANGE, status))
-		ivpu_dbg(vdev, IRQ, "FREQ_CHANGE irq: %08x", REGB_RD32(VPU_HW_BTRS_LNL_PLL_FREQ));
+	if (REG_TEST_FLD(VPU_HW_BTRS_LNL_INTERRUPT_STAT, FREQ_CHANGE, status)) {
+		u32 pll = pll_config_get_lnl(vdev);
+
+		ivpu_dbg(vdev, IRQ, "FREQ_CHANGE irq, wp %08x, %lu MHz",
+			 pll, pll_ratio_to_dpu_freq_lnl(pll) / HZ_PER_MHZ);
+	}
 
 	if (REG_TEST_FLD(VPU_HW_BTRS_LNL_INTERRUPT_STAT, ATS_ERR, status)) {
 		ivpu_err(vdev, "ATS_ERR LOG1 0x%08x ATS_ERR_LOG2 0x%08x\n",
@@ -717,60 +765,6 @@ void ivpu_hw_btrs_dct_set_status(struct ivpu_device *vdev, bool enable, u32 acti
 	REGB_WR32(VPU_HW_BTRS_LNL_PCODE_MAILBOX_STATUS, val);
 }
 
-static u32 pll_ratio_to_freq_mtl(u32 ratio, u32 config)
-{
-	u32 pll_clock = PLL_REF_CLK_FREQ * ratio;
-	u32 cpu_clock;
-
-	if ((config & 0xff) == MTL_PLL_RATIO_4_3)
-		cpu_clock = pll_clock * 2 / 4;
-	else
-		cpu_clock = pll_clock * 2 / 5;
-
-	return cpu_clock;
-}
-
-u32 ivpu_hw_btrs_ratio_to_freq(struct ivpu_device *vdev, u32 ratio)
-{
-	struct ivpu_hw_info *hw = vdev->hw;
-
-	if (ivpu_hw_btrs_gen(vdev) == IVPU_HW_BTRS_MTL)
-		return pll_ratio_to_freq_mtl(ratio, hw->config);
-	else
-		return PLL_RATIO_TO_FREQ(ratio);
-}
-
-static u32 pll_freq_get_mtl(struct ivpu_device *vdev)
-{
-	u32 pll_curr_ratio;
-
-	pll_curr_ratio = REGB_RD32(VPU_HW_BTRS_MTL_CURRENT_PLL);
-	pll_curr_ratio &= VPU_HW_BTRS_MTL_CURRENT_PLL_RATIO_MASK;
-
-	if (!ivpu_is_silicon(vdev))
-		return PLL_SIMULATION_FREQ;
-
-	return pll_ratio_to_freq_mtl(pll_curr_ratio, vdev->hw->config);
-}
-
-static u32 pll_freq_get_lnl(struct ivpu_device *vdev)
-{
-	u32 pll_curr_ratio;
-
-	pll_curr_ratio = REGB_RD32(VPU_HW_BTRS_LNL_PLL_FREQ);
-	pll_curr_ratio &= VPU_HW_BTRS_LNL_PLL_FREQ_RATIO_MASK;
-
-	return PLL_RATIO_TO_FREQ(pll_curr_ratio);
-}
-
-u32 ivpu_hw_btrs_pll_freq_get(struct ivpu_device *vdev)
-{
-	if (ivpu_hw_btrs_gen(vdev) == IVPU_HW_BTRS_MTL)
-		return pll_freq_get_mtl(vdev);
-	else
-		return pll_freq_get_lnl(vdev);
-}
-
 u32 ivpu_hw_btrs_telemetry_offset_get(struct ivpu_device *vdev)
 {
 	if (ivpu_hw_btrs_gen(vdev) == IVPU_HW_BTRS_MTL)