Does this kernel support the Intel® Media Server Studio 2017 R3? #1

pauldotknopf · 2018-02-28T20:13:03Z

https://software.intel.com/en-us/forums/intel-media-sdk/topic/740685

I know they recommend using the 4.4 kernel with the patches they provided, but I am wondering if the same gpu libraries should work with the patches currently present in this repo.

commit 1ff5325 upstream. Avoid circular locking dependency by calling to uobj_alloc_commit() outside of xrcd_tree_mutex lock. ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #87 Not tainted ------------------------------------------------------ syzkaller401056/269 is trying to acquire lock: (&uverbs_dev->xrcd_tree_mutex){+.+.}, at: [<000000006c12d2cd>] uverbs_free_xrcd+0xd2/0x360 but task is already holding lock: (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ucontext->uobjects_lock){+.+.}: __mutex_lock+0x111/0x1720 rdma_alloc_commit_uobject+0x22c/0x600 ib_uverbs_open_xrcd+0x61a/0xdd0 ib_uverbs_write+0x7f9/0xef0 __vfs_write+0x10d/0x700 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x1e/0x8b -> #0 (&uverbs_dev->xrcd_tree_mutex){+.+.}: lock_acquire+0x19d/0x440 __mutex_lock+0x111/0x1720 uverbs_free_xrcd+0xd2/0x360 remove_commit_idr_uobject+0x6d/0x110 uverbs_cleanup_ucontext+0x2f0/0x730 ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120 ib_uverbs_close+0xf2/0x570 __fput+0x2cd/0x8d0 task_work_run+0xec/0x1d0 do_exit+0x6a1/0x1520 do_group_exit+0xe8/0x380 SyS_exit_group+0x1e/0x20 entry_SYSCALL_64_fastpath+0x1e/0x8b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ucontext->uobjects_lock); lock(&uverbs_dev->xrcd_tree_mutex); lock(&ucontext->uobjects_lock); lock(&uverbs_dev->xrcd_tree_mutex); *** DEADLOCK *** 3 locks held by syzkaller401056/269: #0: (&file->cleanup_mutex){+.+.}, at: [<00000000c9f0c252>] ib_uverbs_close+0xac/0x570 #1: (&ucontext->cleanup_rwsem){++++}, at: [<00000000b6994d49>] uverbs_cleanup_ucontext+0xf6/0x730 #2: (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730 stack backtrace: CPU: 0 PID: 269 Comm: syzkaller401056 Not tainted 4.15.0+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ? uverbs_cleanup_ucontext+0x168/0x730 ? console_unlock+0x502/0xbd0 print_circular_bug.isra.24+0x35e/0x396 ? print_circular_bug_header+0x12e/0x12e ? find_usage_backwards+0x30/0x30 ? entry_SYSCALL_64_fastpath+0x1e/0x8b validate_chain.isra.28+0x25d1/0x40c0 ? check_usage+0xb70/0xb70 ? graph_lock+0x160/0x160 ? find_usage_backwards+0x30/0x30 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? __lock_acquire+0x93d/0x1630 __lock_acquire+0x93d/0x1630 lock_acquire+0x19d/0x440 ? uverbs_free_xrcd+0xd2/0x360 __mutex_lock+0x111/0x1720 ? uverbs_free_xrcd+0xd2/0x360 ? uverbs_free_xrcd+0xd2/0x360 ? __mutex_lock+0x828/0x1720 ? mutex_lock_io_nested+0x1550/0x1550 ? uverbs_cleanup_ucontext+0x168/0x730 ? __lock_acquire+0x9a9/0x1630 ? mutex_lock_io_nested+0x1550/0x1550 ? uverbs_cleanup_ucontext+0xf6/0x730 ? lock_contended+0x11a0/0x11a0 ? uverbs_free_xrcd+0xd2/0x360 uverbs_free_xrcd+0xd2/0x360 remove_commit_idr_uobject+0x6d/0x110 uverbs_cleanup_ucontext+0x2f0/0x730 ? sched_clock_cpu+0x18/0x200 ? uverbs_close_fd+0x1c0/0x1c0 ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120 ib_uverbs_close+0xf2/0x570 ? ib_uverbs_remove_one+0xb50/0xb50 ? ib_uverbs_remove_one+0xb50/0xb50 __fput+0x2cd/0x8d0 task_work_run+0xec/0x1d0 do_exit+0x6a1/0x1520 ? fsnotify_first_mark+0x220/0x220 ? exit_notify+0x9f0/0x9f0 ? entry_SYSCALL_64_fastpath+0x5/0x8b ? entry_SYSCALL_64_fastpath+0x5/0x8b ? trace_hardirqs_on_thunk+0x1a/0x1c ? time_hardirqs_on+0x27/0x670 ? time_hardirqs_off+0x27/0x490 ? syscall_return_slowpath+0x6c/0x460 ? entry_SYSCALL_64_fastpath+0x5/0x8b do_group_exit+0xe8/0x380 SyS_exit_group+0x1e/0x20 entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x431ce9 Cc: syzkaller <[email protected]> Cc: <[email protected]> # 4.11 Fixes: fd3c790 ("IB/core: Change idr objects to use the new schema") Reported-by: Noa Osherovich <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f027e0b upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <[email protected]> Signed-off-by: Lars-Peter Clausen <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7ba7166 upstream. It was reported by Sergey Senozhatsky that if THP (Transparent Huge Page) and frontswap (via zswap) are both enabled, when memory goes low so that swap is triggered, segfault and memory corruption will occur in random user space applications as follow, kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000] #0 0x00007fc08889ae0d _int_malloc (libc.so.6) #1 0x00007fc08889c2f3 malloc (libc.so.6) #2 0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt) #3 0x0000560e6005e75c n/a (urxvt) #4 0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt) #5 0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt) #6 0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt) #7 0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt) #8 0x0000560e6005cb55 ev_run (urxvt) #9 0x0000560e6003b9b9 main (urxvt) #10 0x00007fc08883af4a __libc_start_main (libc.so.6) #11 0x0000560e6003f9da _start (urxvt) After bisection, it was found the first bad commit is bd4c82c ("mm, THP, swap: delay splitting THP after swapped out"). The root cause is as follows: When the pages are written to swap device during swapping out in swap_writepage(), zswap (fontswap) is tried to compress the pages to improve performance. But zswap (frontswap) will treat THP as a normal page, so only the head page is saved. After swapping in, tail pages will not be restored to their original contents, causing memory corruption in the applications. This is fixed by refusing to save page in the frontswap store functions if the page is a THP. So that the THP will be swapped out to swap device. Another choice is to split THP if frontswap is enabled. But it is found that the frontswap enabling isn't flexible. For example, if CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if zswap itself isn't enabled. Frontswap has multiple backends, to make it easy for one backend to enable THP support, the THP checking is put in backend frontswap store functions instead of the general interfaces. Link: http://lkml.kernel.org/r/[email protected] Fixes: bd4c82c ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by: "Huang, Ying" <[email protected]> Reported-by: Sergey Senozhatsky <[email protected]> Tested-by: Sergey Senozhatsky <[email protected]> Suggested-by: Minchan Kim <[email protected]> [put THP checking in backend] Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: Dan Streetman <[email protected]> Cc: Seth Jennings <[email protected]> Cc: Tetsuo Handa <[email protected]> Cc: Shaohua Li <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: <[email protected]> [4.14] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b8ff180 upstream. During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489d ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: <[email protected]> # v4.11+ Reviewed-by: Joonas Lahtinen <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 642a843 ] Calling tipc_mon_delete() before the monitor has been created will oops. This can happen in tipc_enable_bearer() error path if tipc_disc_create() fails. [ 48.589074] BUG: unable to handle kernel paging request at 0000000000001008 [ 48.590266] IP: tipc_mon_delete+0xea/0x270 [tipc] [ 48.591223] PGD 1e60c5067 P4D 1e60c5067 PUD 1eb0cf067 PMD 0 [ 48.592230] Oops: 0000 [#1] SMP KASAN [ 48.595610] CPU: 5 PID: 1199 Comm: tipc Tainted: G B 4.15.0-rc4-pc64-dirty #5 [ 48.597176] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 48.598489] RIP: 0010:tipc_mon_delete+0xea/0x270 [tipc] [ 48.599347] RSP: 0018:ffff8801d827f668 EFLAGS: 00010282 [ 48.600705] RAX: ffff8801ee813f00 RBX: 0000000000000204 RCX: 0000000000000000 [ 48.602183] RDX: 1ffffffff1de6a75 RSI: 0000000000000297 RDI: 0000000000000297 [ 48.604373] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1dd1533 [ 48.605607] R10: ffffffff8eafbb05 R11: fffffbfff1dd1534 R12: 0000000000000050 [ 48.607082] R13: dead000000000200 R14: ffffffff8e73f310 R15: 0000000000001020 [ 48.608228] FS: 00007fc686484800(0000) GS:ffff8801f5540000(0000) knlGS:0000000000000000 [ 48.610189] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.611459] CR2: 0000000000001008 CR3: 00000001dda70002 CR4: 00000000003606e0 [ 48.612759] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.613831] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.615038] Call Trace: [ 48.615635] tipc_enable_bearer+0x415/0x5e0 [tipc] [ 48.620623] tipc_nl_bearer_enable+0x1ab/0x200 [tipc] [ 48.625118] genl_family_rcv_msg+0x36b/0x570 [ 48.631233] genl_rcv_msg+0x5a/0xa0 [ 48.631867] netlink_rcv_skb+0x1cc/0x220 [ 48.636373] genl_rcv+0x24/0x40 [ 48.637306] netlink_unicast+0x29c/0x350 [ 48.639664] netlink_sendmsg+0x439/0x590 [ 48.642014] SYSC_sendto+0x199/0x250 [ 48.649912] do_syscall_64+0xfd/0x2c0 [ 48.650651] entry_SYSCALL64_slow_path+0x25/0x25 [ 48.651843] RIP: 0033:0x7fc6859848e3 [ 48.652539] RSP: 002b:00007ffd25dff938 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 48.654003] RAX: ffffffffffffffda RBX: 00007ffd25dff990 RCX: 00007fc6859848e3 [ 48.655303] RDX: 0000000000000054 RSI: 00007ffd25dff990 RDI: 0000000000000003 [ 48.656512] RBP: 00007ffd25dff980 R08: 00007fc685c35fc0 R09: 000000000000000c [ 48.657697] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000d13010 [ 48.658840] R13: 00007ffd25e009c0 R14: 0000000000000000 R15: 0000000000000000 [ 48.662972] RIP: tipc_mon_delete+0xea/0x270 [tipc] RSP: ffff8801d827f668 [ 48.664073] CR2: 0000000000001008 [ 48.664576] ---[ end trace e811818d54d5ce88 ]--- Acked-by: Ying Xue <[email protected]> Acked-by: Jon Maloy <[email protected]> Signed-off-by: Tommi Rantala <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 0b76aae ] This patch adds check so that driver does not disable already disabled device. [ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5 Signed-off-by: Tushar Dave <[email protected]> Tested-by: Fengguang Wu <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e2d5915 ] The hotplug code uses its own workqueue to handle IRQ requests (pseries_hp_wq), however that workqueue is initialized after init_ras_IRQ(). That can lead to a kernel panic if any hotplug interrupts fire after init_ras_IRQ() but before pseries_hp_wq is initialised. eg: UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) NET: Registered protocol family 1 Unpacking initramfs... (qemu) object_add memory-backend-ram,id=mem1,size=10G (qemu) device_add pc-dimm,id=dimm1,memdev=mem1 Unable to handle kernel paging request for data at address 0xf94d03007c421378 Faulting instruction address: 0xc00000000012d744 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-ziviani+ #26 task: (ptrval) task.stack: (ptrval) NIP: c00000000012d744 LR: c00000000012d744 CTR: 0000000000000000 REGS: (ptrval) TRAP: 0380 Not tainted (4.15.0-rc2-ziviani+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088042 XER: 20040000 CFAR: c00000000012d3c4 SOFTE: 0 ... NIP [c00000000012d744] __queue_work+0xd4/0x5c0 LR [c00000000012d744] __queue_work+0xd4/0x5c0 Call Trace: [c0000000fffefb90] [c00000000012d744] __queue_work+0xd4/0x5c0 (unreliable) [c0000000fffefc70] [c00000000012dce4] queue_work_on+0xb4/0xf0 This commit makes the RAS IRQ registration explicitly dependent on the creation of the pseries_hp_wq. Reported-by: Min Deng <[email protected]> Reported-by: Daniel Henrique Barboza <[email protected]> Tested-by: Jose Ricardo Ziviani <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: David Gibson <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f23a535 upstream. The ib_write_umad() is protected by taking the umad file mutex. However, it accesses file->port->ib_dev -- which is protected only by the port's mutex (field file_mutex). The ib_umad_remove_one() calls ib_umad_kill_port() which sets port->ib_dev to NULL under the port mutex (NOT the file mutex). It then sets the mad agent to "dead" under the umad file mutex. This is a race condition -- because there is a window where port->ib_dev is NULL, while the agent is not "dead". As a result, we saw stack traces like: [16490.678059] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [16490.678246] IP: ib_umad_write+0x29c/0xa3a [ib_umad] [16490.678333] PGD 0 P4D 0 [16490.678404] Oops: 0000 [#1] SMP PTI [16490.678466] Modules linked in: rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx4_en(OE) ptp pps_core mlx4_ib(OE-) ib_core(OE) mlx4_core(OE) mlx_compat (OE) memtrack(OE) devlink mst_pciconf(OE) mst_pci(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache cfg80211 rfkill esp6_offload esp6 esp4_offload esp4 sunrpc kvm_intel kvm ppdev parport_pc irqbypass parport joydev i2c_piix4 virtio_balloon cirrus drm_kms_helper ttm drm e1000 serio_raw virtio_pci virtio_ring virtio ata_generic pata_acpi qemu_fw_cfg [last unloaded: mlxfw] [16490.679202] CPU: 4 PID: 3115 Comm: sminfo Tainted: G OE 4.14.13-300.fc27.x86_64 #1 [16490.679339] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [16490.679477] task: ffff9cf753890000 task.stack: ffffaf70c26b0000 [16490.679571] RIP: 0010:ib_umad_write+0x29c/0xa3a [ib_umad] [16490.679664] RSP: 0018:ffffaf70c26b3d90 EFLAGS: 00010202 [16490.679747] RAX: 0000000000000010 RBX: ffff9cf75610fd80 RCX: 0000000000000000 [16490.679856] RDX: 0000000000000001 RSI: 00007ffdf2bfd714 RDI: ffff9cf6bb2a9c00 In the above trace, ib_umad_write is trying to dereference the NULL file->port->ib_dev pointer. Fix this by using the agent's device pointer (the device field in struct ib_mad_agent) -- which IS protected by the umad file mutex. Fixes: 44c5848 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ff26cc1 upstream. If we can't get inode lock immediately in the function ocfs2_inode_lock_with_page() when reading a page, we should not return directly here, since this will lead to a softlockup problem when the kernel is configured with CONFIG_PREEMPT is not set. The method is to get a blocking lock and immediately unlock before returning, this can avoid CPU resource waste due to lots of retries, and benefits fairness in getting lock among multiple nodes, increase efficiency in case modifying the same file frequently from multiple nodes. The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1) looks like: Kernel panic - not syncing: softlockup: hung tasks CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <IRQ> dump_stack+0x5c/0x82 panic+0xd5/0x21e watchdog_timer_fn+0x208/0x210 __hrtimer_run_queues+0xcc/0x200 hrtimer_interrupt+0xa6/0x1f0 smp_apic_timer_interrupt+0x34/0x50 apic_timer_interrupt+0x96/0xa0 </IRQ> RIP: 0010:unlock_page+0x17/0x30 RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004 RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00 R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518 R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300 ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2] ocfs2_readpage+0x41/0x2d0 [ocfs2] filemap_fault+0x12b/0x5c0 ocfs2_fault+0x29/0xb0 [ocfs2] __do_fault+0x1a/0xa0 __handle_mm_fault+0xbe8/0x1090 handle_mm_fault+0xaa/0x1f0 __do_page_fault+0x235/0x4b0 trace_do_page_fault+0x3c/0x110 async_page_fault+0x28/0x30 RIP: 0033:0x7fa75ded638e RSP: 002b:00007ffd6657db18 EFLAGS: 00010287 RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700 RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700 RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000 R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770 R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000 About performance improvement, we can see the testing time is reduced, and CPU utilization decreases, the detailed data is as follows. I ran multi_mmap test case in ocfs2-test package in a three nodes cluster. Before applying this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2754 ocfs2te+ 20 0 170248 6980 4856 D 80.73 0.341 0:18.71 multi_mmap 1505 root rt 0 222236 123060 97224 S 2.658 6.015 0:01.44 corosync 5 root 20 0 0 0 0 S 1.329 0.000 0:00.19 kworker/u8:0 95 root 20 0 0 0 0 S 1.329 0.000 0:00.25 kworker/u8:1 2728 root 20 0 0 0 0 S 0.997 0.000 0:00.24 jbd2/sda1-33 2721 root 20 0 0 0 0 S 0.664 0.000 0:00.07 ocfs2dc-3C8CFD4 2750 ocfs2te+ 20 0 142976 4652 3532 S 0.664 0.227 0:00.28 mpirun ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 14:44:52 CST 2017 multi_mmap..................................................Passed. Runtime 783 seconds. After apply this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2508 ocfs2te+ 20 0 170248 6804 4680 R 54.00 0.333 0:55.37 multi_mmap 155 root 20 0 0 0 0 S 2.667 0.000 0:01.20 kworker/u8:3 95 root 20 0 0 0 0 S 2.000 0.000 0:01.58 kworker/u8:1 2504 ocfs2te+ 20 0 142976 4604 3480 R 1.667 0.225 0:01.65 mpirun 5 root 20 0 0 0 0 S 1.000 0.000 0:01.36 kworker/u8:0 2482 root 20 0 0 0 0 S 1.000 0.000 0:00.86 jbd2/sda1-33 299 root 0 -20 0 0 0 S 0.333 0.000 0:00.13 kworker/2:1H 335 root 0 -20 0 0 0 S 0.333 0.000 0:00.17 kworker/1:1H 535 root 20 0 12140 7268 1456 S 0.333 0.355 0:00.34 haveged 1282 root rt 0 222284 123108 97224 S 0.333 6.017 0:01.33 corosync ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 15:04:12 CST 2017 multi_mmap..................................................Passed. Runtime 487 seconds. Link: http://lkml.kernel.org/r/[email protected] Fixes: 1cce4df ("ocfs2: do not lock/unlock() inode DLM lock") Signed-off-by: Gang He <[email protected]> Reviewed-by: Eric Ren <[email protected]> Acked-by: alex chen <[email protected]> Acked-by: piaojun <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…iled. commit bb422a7 upstream. Syzbot caught an oops at unregister_shrinker() because combination of commit 1d3d443 ("vmscan: per-node deferred work") and fault injection made register_shrinker() fail and the caller of register_shrinker() did not check for failure. ---------- [ 554.881422] FAULT_INJECTION: forcing a failure. [ 554.881422] name failslab, interval 1, probability 0, space 0, times 0 [ 554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.881445] Call Trace: [ 554.881459] dump_stack+0x194/0x257 [ 554.881474] ? arch_local_irq_restore+0x53/0x53 [ 554.881486] ? find_held_lock+0x35/0x1d0 [ 554.881507] should_fail+0x8c0/0xa40 [ 554.881522] ? fault_create_debugfs_attr+0x1f0/0x1f0 [ 554.881537] ? check_noncircular+0x20/0x20 [ 554.881546] ? find_next_zero_bit+0x2c/0x40 [ 554.881560] ? ida_get_new_above+0x421/0x9d0 [ 554.881577] ? find_held_lock+0x35/0x1d0 [ 554.881594] ? __lock_is_held+0xb6/0x140 [ 554.881628] ? check_same_owner+0x320/0x320 [ 554.881634] ? lock_downgrade+0x990/0x990 [ 554.881649] ? find_held_lock+0x35/0x1d0 [ 554.881672] should_failslab+0xec/0x120 [ 554.881684] __kmalloc+0x63/0x760 [ 554.881692] ? lock_downgrade+0x990/0x990 [ 554.881712] ? register_shrinker+0x10e/0x2d0 [ 554.881721] ? trace_event_raw_event_module_request+0x320/0x320 [ 554.881737] register_shrinker+0x10e/0x2d0 [ 554.881747] ? prepare_kswapd_sleep+0x1f0/0x1f0 [ 554.881755] ? _down_write_nest_lock+0x120/0x120 [ 554.881765] ? memcpy+0x45/0x50 [ 554.881785] sget_userns+0xbcd/0xe20 (...snipped...) [ 554.898693] kasan: CONFIG_KASAN_INLINE enabled [ 554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 554.898732] general protection fault: 0000 [#1] SMP KASAN [ 554.898737] Dumping ftrace buffer: [ 554.898741] (ftrace buffer empty) [ 554.898743] Modules linked in: [ 554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000 [ 554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150 [ 554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246 [ 554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0 [ 554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004 [ 554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000 [ 554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98 [ 554.898800] FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 [ 554.898804] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0 [ 554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 [ 554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 [ 554.898818] Call Trace: [ 554.898828] unregister_shrinker+0x79/0x300 [ 554.898837] ? perf_trace_mm_vmscan_writepage+0x750/0x750 [ 554.898844] ? down_write+0x87/0x120 [ 554.898851] ? deactivate_super+0x139/0x1b0 [ 554.898857] ? down_read+0x150/0x150 [ 554.898864] ? check_same_owner+0x320/0x320 [ 554.898875] deactivate_locked_super+0x64/0xd0 [ 554.898883] deactivate_super+0x141/0x1b0 ---------- Since allowing register_shrinker() callers to call unregister_shrinker() when register_shrinker() failed can simplify error recovery path, this patch makes unregister_shrinker() no-op when register_shrinker() failed. Also, reset shrinker->nr_deferred in case unregister_shrinker() was by error called twice. Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: Aliaksei Karaliou <[email protected]> Reported-by: syzbot <[email protected]> Cc: Glauber Costa <[email protected]> Cc: Al Viro <[email protected]> Signed-off-by: Al Viro <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d0e312f upstream. The RDMA netlink core code checks validity of messages by ensuring that type and operand are in range. It works well for almost all clients except NLDEV, which has cb_table less than number of operands. Request to access such operand will trigger the following kernel panic. This patch updates all places where cb_table is declared for the consistency, but only NLDEV is actually need it. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 0 PID: 522 Comm: syz-executor6 Not tainted 4.13.0+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 task: ffff8800657799c0 task.stack: ffff8800695d000 RIP: 0010:rdma_nl_rcv_msg+0x13a/0x4c0 RSP: 0018:ffff8800695d7838 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: 1ffff1000d2baf0b RCX: 00000000704ff4d7 RDX: 0000000000000000 RSI: ffffffff81ddb03c RDI: 00000003827fa6bc RBP: ffff8800695d7900 R08: ffffffff82ec0578 R09: 0000000000000000 R10: ffff8800695d7900 R11: 0000000000000001 R12: 000000000000001c R13: ffff880069d31e00 R14: 00000000ffffffff R15: ffff880069d357c0 FS: 00007fee6acb8700(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000201a9000 CR3: 0000000059766000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? rdma_nl_multicast+0x80/0x80 rdma_nl_rcv+0x36b/0x4d0 ? ibnl_put_attr+0xc0/0xc0 netlink_unicast+0x4bd/0x6d0 ? netlink_sendskb+0x50/0x50 ? drop_futex_key_refs.isra.4+0x68/0xb0 netlink_sendmsg+0x9ab/0xbd0 ? nlmsg_notify+0x140/0x140 ? wake_up_q+0xa1/0xf0 ? drop_futex_key_refs.isra.4+0x68/0xb0 sock_sendmsg+0x88/0xd0 sock_write_iter+0x228/0x3c0 ? sock_sendmsg+0xd0/0xd0 ? do_futex+0x3e5/0xb20 ? iov_iter_init+0xaf/0x1d0 __vfs_write+0x46e/0x640 ? sched_clock_cpu+0x1b/0x190 ? __vfs_read+0x620/0x620 ? __fget+0x23a/0x390 ? rw_verify_area+0xca/0x290 vfs_write+0x192/0x490 SyS_write+0xde/0x1c0 ? SyS_read+0x1c0/0x1c0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fee6a74a219 RSP: 002b:00007fee6acb7d58 EFLAGS: 00000212 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000638000 RCX: 00007fee6a74a219 RDX: 0000000000000078 RSI: 0000000020141000 RDI: 0000000000000006 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: ffff8800695d7f98 R13: 0000000020141000 R14: 0000000000000006 R15: 00000000ffffffff Code: d6 48 b8 00 00 00 00 00 fc ff df 66 41 81 e4 ff 03 44 8d 72 ff 4a 8d 3c b5 c0 a6 7f 82 44 89 b5 4c ff ff ff 48 89 f9 48 c1 e9 03 <0f> b6 0c 01 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: rdma_nl_rcv_msg+0x13a/0x4c0 RSP: ffff8800695d7838 ---[ end trace ba085d123959c8ec ]--- Kernel panic - not syncing: Fatal exception Cc: syzkaller <[email protected]> Fixes: b4c598a ("RDMA/netlink: Implement nldev device dumpit calback") Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Doug Ledford <[email protected]>

commit 3f34cfa upstream. Syzbot reported several deadlocks in the netfilter area caused by rtnl lock and socket lock being acquired with a different order on different code paths, leading to backtraces like the following one: ====================================================== WARNING: possible circular locking dependency detected 4.15.0-rc9+ #212 Not tainted ------------------------------------------------------ syzkaller041579/3682 is trying to acquire lock: (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock include/net/sock.h:1463 [inline] (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 but task is already holding lock: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:756 [inline] __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607 tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845 check_target net/ipv6/netfilter/ip6_tables.c:538 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:580 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749 do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 -> #0 (sk_lock-AF_INET6){+.+.}: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914 lock_sock_nested+0xc2/0x110 net/core/sock.c:2780 lock_sock include/net/sock.h:1463 [inline] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_INET6); lock(rtnl_mutex); lock(sk_lock-AF_INET6); *** DEADLOCK *** 1 lock held by syzkaller041579/3682: #0: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 The problem, as Florian noted, is that nf_setsockopt() is always called with the socket held, even if the lock itself is required only for very tight scopes and only for some operation. This patch addresses the issues moving the lock_sock() call only where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt() does not need anymore to acquire both locks. Fixes: 22265a5 ("netfilter: xt_TEE: resolve oif using netdevice notifiers") Reported-by: [email protected] Suggested-by: Florian Westphal <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 6ab4051 ] Check whether inputs from userspace are too long (explicit length field too big or string not null-terminated) to avoid out-of-bounds reads. As far as I can tell, this can at worst lead to very limited kernel heap memory disclosure or oopses. This bug can be triggered by an unprivileged user even if the xt_bpf module is not loaded: iptables is available in network namespaces, and the xt_bpf module can be autoloaded. Triggering the bug with a classic BPF filter with fake length 0x1000 causes the following KASAN report: ================================================================== BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0 Read of size 32768 at addr ffff8801eff2c494 by task test/4627 CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1 [...] Call Trace: dump_stack+0x5c/0x85 print_address_description+0x6a/0x260 kasan_report+0x254/0x370 ? bpf_prog_create+0x84/0xf0 memcpy+0x1f/0x50 bpf_prog_create+0x84/0xf0 bpf_mt_check+0x90/0xd6 [xt_bpf] [...] Allocated by task 4627: kasan_kmalloc+0xa0/0xd0 __kmalloc_node+0x47/0x60 xt_alloc_table_info+0x41/0x70 [x_tables] [...] The buggy address belongs to the object at ffff8801eff2c3c0 which belongs to the cache kmalloc-2048 of size 2048 The buggy address is located 212 bytes inside of 2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0) [...] ================================================================== Fixes: e6f30c7 ("netfilter: x_tables: add xt_bpf match") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 87a81dc upstream. Performing the hash of an empty file leads to a kernel Oops [ 44.504600] Unable to handle kernel paging request for data at address 0x0000000c [ 44.512819] Faulting instruction address: 0xc02d2be8 [ 44.524088] Oops: Kernel access of bad area, sig: 11 [#1] [ 44.529171] BE PREEMPT CMPC885 [ 44.532232] CPU: 0 PID: 491 Comm: md5sum Not tainted 4.15.0-rc8-00211-g3a968610b6ea #81 [ 44.540814] NIP: c02d2be8 LR: c02d2984 CTR: 00000000 [ 44.545812] REGS: c6813c90 TRAP: 0300 Not tainted (4.15.0-rc8-00211-g3a968610b6ea) [ 44.554223] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48222822 XER: 20000000 [ 44.560855] DAR: 0000000c DSISR: c0000000 [ 44.560855] GPR00: c02d28fc c6813d40 c6828000 c646fa40 00000001 00000001 00000001 00000000 [ 44.560855] GPR08: 0000004c 00000000 c000bfcc 00000000 28222822 100280d4 00000000 10020008 [ 44.560855] GPR16: 00000000 00000020 00000000 00000000 10024008 00000000 c646f9f0 c6179a10 [ 44.560855] GPR24: 00000000 00000001 c62f0018 c6179a10 00000000 c6367a30 c62f0000 c646f9c0 [ 44.598542] NIP [c02d2be8] ahash_process_req+0x448/0x700 [ 44.603751] LR [c02d2984] ahash_process_req+0x1e4/0x700 [ 44.608868] Call Trace: [ 44.611329] [c6813d40] [c02d28fc] ahash_process_req+0x15c/0x700 (unreliable) [ 44.618302] [c6813d90] [c02060c4] hash_recvmsg+0x11c/0x210 [ 44.623716] [c6813db0] [c0331354] ___sys_recvmsg+0x98/0x138 [ 44.629226] [c6813eb0] [c03332c0] __sys_recvmsg+0x40/0x84 [ 44.634562] [c6813f10] [c03336c0] SyS_socketcall+0xb8/0x1d4 [ 44.640073] [c6813f40] [c000d1ac] ret_from_syscall+0x0/0x38 [ 44.645530] Instruction dump: [ 44.648465] 38c00001 7f63db78 4e800421 7c791b78 54690ffe 0f090000 80ff0190 2f870000 [ 44.656122] 40befe50 2f990001 409e0210 813f01bc <8129000c> b39e003a 7d29c214 913e003c This patch fixes that Oops by checking if src is NULL. Fixes: 6a1e8d1 ("crypto: talitos - making mapping helpers more generic") Cc: <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b9c97c6 upstream. If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b28676b upstream. Reported by syzkaller: pte_list_remove: ffff9714eb1f8078 0->BUG ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu.c:1157! invalid opcode: 0000 [#1] SMP RIP: 0010:pte_list_remove+0x11b/0x120 [kvm] Call Trace: drop_spte+0x83/0xb0 [kvm] mmu_page_zap_pte+0xcc/0xe0 [kvm] kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm] kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm] kvm_arch_flush_shadow_all+0xe/0x10 [kvm] kvm_mmu_notifier_release+0x6c/0xa0 [kvm] ? kvm_mmu_notifier_release+0x5/0xa0 [kvm] __mmu_notifier_release+0x79/0x110 ? __mmu_notifier_release+0x5/0x110 exit_mmap+0x15a/0x170 ? do_exit+0x281/0xcb0 mmput+0x66/0x160 do_exit+0x2c9/0xcb0 ? __context_tracking_exit.part.5+0x4a/0x150 do_group_exit+0x50/0xd0 SyS_exit_group+0x14/0x20 do_syscall_64+0x73/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 The reason is that when creates new memslot, there is no guarantee for new memslot not overlap with private memslots. This can be triggered by the following program: #include <fcntl.h> #include <pthread.h> #include <setjmp.h> #include <signal.h> #include <stddef.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> #include <linux/kvm.h> long r[16]; int main() { void *p = valloc(0x4000); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); uint64_t addr = 0xf000; ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr); r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul); ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul); ioctl(r[6], KVM_RUN, 0); ioctl(r[6], KVM_RUN, 0); struct kvm_userspace_memory_region mr = { .slot = 0, .flags = KVM_MEM_LOG_DIRTY_PAGES, .guest_phys_addr = 0xf000, .memory_size = 0x4000, .userspace_addr = (uintptr_t) p }; ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr); return 0; } This patch fixes the bug by not adding a new memslot even if it overlaps with private memslots. Reported-by: Dmitry Vyukov <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Eric Biggers <[email protected]> Cc: [email protected] Signed-off-by: Wanpeng Li <[email protected]>

commit 0b2e990 upstream. The initial reset of the local APIC is performed before the VMCS has been created, but it tries to do a vmwrite: vmwrite error: reg 810 value 4a00 (err 18944) CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1 Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014 Call Trace: vmx_set_rvi [kvm_intel] vmx_hwapic_irr_update [kvm_intel] kvm_lapic_reset [kvm] kvm_create_lapic [kvm] kvm_arch_vcpu_init [kvm] kvm_vcpu_init [kvm] vmx_create_vcpu [kvm_intel] kvm_vm_ioctl [kvm] Move it later, after the VMCS has been created. Fixes: 4191db2 ("KVM: x86: Update APICv on APIC reset") Cc: [email protected] Cc: Liran Alon <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ upstream commit 6c5f610 ] Commit 9a3efb6 ("bpf: fix memory leak in lpm_trie map_free callback function") fixed a memory leak and removed unnecessary locks in map_free callback function. Unfortrunately, it introduced a lockdep warning. When lockdep checking is turned on, running tools/testing/selftests/bpf/test_lpm_map will have: [ 98.294321] ============================= [ 98.294807] WARNING: suspicious RCU usage [ 98.295359] 4.16.0-rc2+ #193 Not tainted [ 98.295907] ----------------------------- [ 98.296486] /home/yhs/work/bpf/kernel/bpf/lpm_trie.c:572 suspicious rcu_dereference_check() usage! [ 98.297657] [ 98.297657] other info that might help us debug this: [ 98.297657] [ 98.298663] [ 98.298663] rcu_scheduler_active = 2, debug_locks = 1 [ 98.299536] 2 locks held by kworker/2:1/54: [ 98.300152] #0: ((wq_completion)"events"){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0 [ 98.301381] #1: ((work_completion)(&map->work)){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0 Since actual trie tree removal happens only after no other accesses to the tree are possible, replacing rcu_dereference_protected(*slot, lockdep_is_held(&trie->lock)) with rcu_dereference_protected(*slot, 1) fixed the issue. Fixes: 9a3efb6 ("bpf: fix memory leak in lpm_trie map_free callback function") Reported-by: Eric Dumazet <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ upstream commit 16338a9 ] I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb5599 ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccd ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb5599 ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ upstream commit ca36960 ] The requirements around atomic_add() / atomic64_add() resp. their JIT implementations differ across architectures. E.g. while x86_64 seems just fine with BPF's xadd on unaligned memory, on arm64 it triggers via interpreter but also JIT the following crash: [ 830.864985] Unable to handle kernel paging request at virtual address ffff8097d7ed6703 [...] [ 830.916161] Internal error: Oops: 96000021 [#1] SMP [ 830.984755] CPU: 37 PID: 2788 Comm: test_verifier Not tainted 4.16.0-rc2+ #8 [ 830.991790] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.29 07/17/2017 [ 830.998998] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 831.003793] pc : __ll_sc_atomic_add+0x4/0x18 [ 831.008055] lr : ___bpf_prog_run+0x1198/0x1588 [ 831.012485] sp : ffff00001ccabc20 [ 831.015786] x29: ffff00001ccabc20 x28: ffff8017d56a0f00 [ 831.021087] x27: 0000000000000001 x26: 0000000000000000 [ 831.026387] x25: 000000c168d9db98 x24: 0000000000000000 [ 831.031686] x23: ffff000008203878 x22: ffff000009488000 [ 831.036986] x21: ffff000008b14e28 x20: ffff00001ccabcb0 [ 831.042286] x19: ffff0000097b5080 x18: 0000000000000a03 [ 831.047585] x17: 0000000000000000 x16: 0000000000000000 [ 831.052885] x15: 0000ffffaeca8000 x14: 0000000000000000 [ 831.058184] x13: 0000000000000000 x12: 0000000000000000 [ 831.063484] x11: 0000000000000001 x10: 0000000000000000 [ 831.068783] x9 : 0000000000000000 x8 : 0000000000000000 [ 831.074083] x7 : 0000000000000000 x6 : 000580d428000000 [ 831.079383] x5 : 0000000000000018 x4 : 0000000000000000 [ 831.084682] x3 : ffff00001ccabcb0 x2 : 0000000000000001 [ 831.089982] x1 : ffff8097d7ed6703 x0 : 0000000000000001 [ 831.095282] Process test_verifier (pid: 2788, stack limit = 0x0000000018370044) [ 831.102577] Call trace: [ 831.105012] __ll_sc_atomic_add+0x4/0x18 [ 831.108923] __bpf_prog_run32+0x4c/0x70 [ 831.112748] bpf_test_run+0x78/0xf8 [ 831.116224] bpf_prog_test_run_xdp+0xb4/0x120 [ 831.120567] SyS_bpf+0x77c/0x1110 [ 831.123873] el0_svc_naked+0x30/0x34 [ 831.127437] Code: 97fffe97 17ffffec 00000000 f9800031 (885f7c31) Reason for this is because memory is required to be aligned. In case of BPF, we always enforce alignment in terms of stack access, but not when accessing map values or packet data when the underlying arch (e.g. arm64) has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set. xadd on packet data that is local to us anyway is just wrong, so forbid this case entirely. The only place where xadd makes sense in fact are map values; xadd on stack is wrong as well, but it's been around for much longer. Specifically enforce strict alignment in case of xadd, so that we handle this case generically and avoid such crashes in the first place. Fixes: 17a5267 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1041401 upstream. syzbot reported that xt_LED may try to use the ledinternal->timer without previously initializing it: ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline] RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293 RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6 RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68 RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000 R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90 FS: 0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243 NF_HOOK include/linux/netfilter.h:286 [inline] ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491 ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633 addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008 process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429 Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb 57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3 57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70 RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8 RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8 ---[ end trace f661ab06f5dd8b3d ]--- The ledinternal struct can be shared between several different xt_LED targets, but the related timer is currently initialized only if the first target requires it. Fix it by unconditionally initializing the timer struct. v1 -> v2: call del_timer_sync() unconditionally, too. Fixes: 268cb38 ("netfilter: x_tables: add LED trigger target") Reported-by: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit db57ccf upstream. syzbot reported a division by 0 bug in the netfilter nat code: divide error: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: 0018:ffff8801b2466778 EFLAGS: 00010246 RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900 R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153 R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c FS: 00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30 get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362 nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406 nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124 redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41 nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302 nf_nat_ipv6_local_fn+0x33/0x5d0 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407 ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] NF_HOOK include/linux/netfilter.h:286 [inline] ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142 dccp_connect+0x369/0x670 net/dccp/output.c:564 dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946 __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x441c69 RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69 RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590 R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000 Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b 45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48 c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01 RIP: nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778 The problem is that currently we don't have any check on the configured port range. A port range == -1 triggers the bug, while other negative values may require a very long time to complete the following loop. This commit addresses the issue swapping the two ends on negative ranges. The check is performed in nf_nat_l4proto_unique_tuple() since the nft nat loads the port values from nft registers at runtime. v1 -> v2: use the correct 'Fixes' tag v2 -> v3: update commit message, drop unneeded READ_ONCE() Fixes: 5b1158e ("[NETFILTER]: Add NAT support for nf_conntrack") Reported-by: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a5dcb73 upstream. when sock_create_kern(..., a) returns an error, 'a' might not be a valid pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and and a->sk->sk_rcvbuf; not doing that caused the following crash: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746 RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020 RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0 FS: 0000000001afb880(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sock_create+0x4d4/0x850 net/socket.c:1285 sock_create net/socket.c:1325 [inline] SYSC_socketpair net/socket.c:1409 [inline] SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x4404b9 RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031 R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00 RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8 Fixes: cd6851f smc: remote memory buffers (RMBs) Reported-and-tested-by: [email protected] Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d64d6c5 upstream. This patch fixes regression added by commit d745952 ("scsi: qla2xxx: Add multiple queue pair functionality."). When driver is not able to get reqeusted IRQs from the system, driver will attempt tp clean up memory before failing hardware probe. During this cleanup, driver assigns NULL value to the pointer which has not been allocated by driver yet. This results in a NULL pointer access. Log file will show following message and stack trace qla2xxx [0000:a3:00.1]-00c7:21: MSI-X: Failed to enable support, giving up -- 32/-1. qla2xxx [0000:a3:00.1]-0037:21: Falling back-to MSI mode --1. qla2xxx [0000:a3:00.1]-003a:21: Failed to reserve interrupt 821 already in use. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffc010c4b6>] qla2x00_probe_one+0x18b6/0x2730 [qla2xxx] PGD 0 Oops: 0002 [#1] SMP Fixes: d745952 ("scsi: qla2xxx: Add multiple queue pair functionality."). Cc: <[email protected]> # 4.10 Signed-off-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 3efc31f upstream. During error test case where switch port status is toggled from enable to disable, following stack trace is seen which indicates recursion trying to send terminate exchange. This regression was introduced by commit 82de802 ("scsi: qla2xxx: Preparation for Target MQ.") BUG: stack guard page was hit at ffffb96488383ff8 (stack is ffffb96488384000..ffffb96488387fff) BUG: stack guard page was hit at ffffb964886c3ff8 (stack is ffffb964886c4000..ffffb964886c7fff) kernel stack overflow (double-fault): 0000 [#1] SMP qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] Fixes: 82de802 ("scsi: qla2xxx: Preparation for Target MQ.") Cc: <[email protected]> #4.10 Signed-off-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit cb88a05 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5b ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5b ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: [email protected] Signed-off-by: Danilo Krummrich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2fe2582 ] The rcutorture test suite occasionally provokes a splat due to invoking rt_mutex_lock() which needs to boost the priority of a task currently sitting on a runqueue that belongs to an offline CPU: WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082 RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004 RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200 FS: 0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0 Call Trace: resched_curr+0x61/0xd0 switched_to_rt+0x8f/0xa0 rt_mutex_setprio+0x25c/0x410 task_blocks_on_rt_mutex+0x1b3/0x1f0 rt_mutex_slowlock+0xa9/0x1e0 rt_mutex_lock+0x29/0x30 rcu_boost_kthread+0x127/0x3c0 kthread+0x104/0x140 ? rcu_report_unblock_qs_rnp+0x90/0x90 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x30 Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48 But the target task's priority has already been adjusted, so the only purpose of switched_to_rt() invoking resched_curr() is to wake up the CPU running some task that needs to be preempted by the boosted task. But the CPU is offline, which presumably means that the task must be migrated to some other CPU, and that this other CPU will undertake any needed preemption at the time of migration. Because the runqueue lock is held when resched_curr() is invoked, we know that the boosted task cannot go anywhere, so it is not necessary to invoke resched_curr() in this particular case. This commit therefore makes switched_to_rt() refrain from invoking resched_curr() when the target CPU is offline. Signed-off-by: Paul E. McKenney <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a0982df ] The rcutorture test suite occasionally provokes a splat due to invoking resched_cpu() on an offline CPU: WARNING: CPU: 2 PID: 8 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 2 PID: 8 Comm: rcu_preempt Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff902ede9daf00 task.stack: ffff96c50010c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffff96c50010fdb8 EFLAGS: 00010096 RAX: 000000000000002e RBX: ffff902edaab4680 RCX: 0000000000000003 RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: ffff96c50010fdb8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000299f36ae R12: 0000000000000001 R13: ffffffff9de64240 R14: 0000000000000001 R15: ffffffff9de64240 FS: 0000000000000000(0000) GS:ffff902edfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f7d4c642 CR3: 000000001e0e2000 CR4: 00000000000006e0 Call Trace: resched_curr+0x8f/0x1c0 resched_cpu+0x2c/0x40 rcu_implicit_dynticks_qs+0x152/0x220 force_qs_rnp+0x147/0x1d0 ? sync_rcu_exp_select_cpus+0x450/0x450 rcu_gp_kthread+0x5a9/0x950 kthread+0x142/0x180 ? force_qs_rnp+0x1d0/0x1d0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 14 01 0f 92 c0 84 c0 74 14 48 8b 05 14 4f f4 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 38 89 ca 9d e8 e5 56 08 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 52 9e 37 02 85 c0 75 38 55 48 ---[ end trace 26df9e5df4bba4ac ]--- This splat cannot be generated by expedited grace periods because they always invoke resched_cpu() on the current CPU, which is good because expedited grace periods require that resched_cpu() unconditionally succeed. However, other parts of RCU can tolerate resched_cpu() acting as a no-op, at least as long as it doesn't happen too often. This commit therefore makes resched_cpu() invoke resched_curr() only if the CPU is either online or is the current CPU. Signed-off-by: Paul E. McKenney <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…ntext | BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:914 | in_atomic(): 1, irqs_disabled(): 0, pid: 255, name: kworker/u257:6 | 5 locks held by kworker/u257:6/255: | #0: ("events_unbound"){.+.+.+}, at: [<ffffffff8108edf1>] process_one_work+0x171/0x5e0 | #1: ((&entry->work)){+.+.+.}, at: [<ffffffff8108edf1>] process_one_work+0x171/0x5e0 | #2: (&shost->scan_mutex){+.+.+.}, at: [<ffffffffa000faa3>] __scsi_add_device+0xa3/0x130 [scsi_mod] | #3: (&set->tag_list_lock){+.+...}, at: [<ffffffff812f09fa>] blk_mq_init_queue+0x96a/0xa50 | #4: (rcu_read_lock_sched){......}, at: [<ffffffff8132887d>] percpu_ref_kill_and_confirm+0x1d/0x120 | Preemption disabled at:[<ffffffff812eff76>] blk_mq_freeze_queue_start+0x56/0x70 | | CPU: 2 PID: 255 Comm: kworker/u257:6 Not tainted 3.18.7-rt0+ #1 | Workqueue: events_unbound async_run_entry_fn | 0000000000000003 ffff8800bc29f998 ffffffff815b3a12 0000000000000000 | 0000000000000000 ffff8800bc29f9b8 ffffffff8109aa16 ffff8800bc29fa28 | ffff8800bc5d1bc8 ffff8800bc29f9e8 ffffffff815b8dd4 ffff880000000000 | Call Trace: | [<ffffffff815b3a12>] dump_stack+0x4f/0x7c | [<ffffffff8109aa16>] __might_sleep+0x116/0x190 | [<ffffffff815b8dd4>] rt_spin_lock+0x24/0x60 | [<ffffffff810b6089>] __wake_up+0x29/0x60 | [<ffffffff812ee06e>] blk_mq_usage_counter_release+0x1e/0x20 | [<ffffffff81328966>] percpu_ref_kill_and_confirm+0x106/0x120 | [<ffffffff812eff76>] blk_mq_freeze_queue_start+0x56/0x70 | [<ffffffff812f0000>] blk_mq_update_tag_set_depth+0x40/0xd0 | [<ffffffff812f0a1c>] blk_mq_init_queue+0x98c/0xa50 | [<ffffffffa000dcf0>] scsi_mq_alloc_queue+0x20/0x60 [scsi_mod] | [<ffffffffa000ea35>] scsi_alloc_sdev+0x2f5/0x370 [scsi_mod] | [<ffffffffa000f494>] scsi_probe_and_add_lun+0x9e4/0xdd0 [scsi_mod] | [<ffffffffa000fb26>] __scsi_add_device+0x126/0x130 [scsi_mod] | [<ffffffffa013033f>] ata_scsi_scan_host+0xaf/0x200 [libata] | [<ffffffffa012b5b6>] async_port_probe+0x46/0x60 [libata] | [<ffffffff810978fb>] async_run_entry_fn+0x3b/0xf0 | [<ffffffff8108ee81>] process_one_work+0x201/0x5e0 percpu_ref_kill_and_confirm() invokes blk_mq_usage_counter_release() in a rcu-sched region. swait based wake queue can't be used due to wake_up_all() usage and disabled interrupts in !RT configs (as reported by Corey Minyard). The wq_has_sleeper() check has been suggested by Peter Zijlstra. Cc: [email protected] Signed-off-by: Sebastian Andrzej Siewior <[email protected]>

commit 9ef0f88 upstream. Just when I had decided that flush_cache_range() was always called with a valid context, Helge reported two cases where the "BUG_ON(!vma->vm_mm->context);" was hit on the phantom buildd: kernel BUG at /mnt/sdb6/linux/linux-4.15.4/arch/parisc/kernel/cache.c:587! CPU: 1 PID: 3254 Comm: kworker/1:2 Tainted: G D 4.15.0-1-parisc64-smp #1 Debian 4.15.4-1+b1 Workqueue: events free_ioctx IAOQ[0]: flush_cache_range+0x164/0x168 IAOQ[1]: flush_cache_page+0x0/0x1c8 RP(r2): unmap_page_range+0xae8/0xb88 Backtrace: [<00000000404a6980>] unmap_page_range+0xae8/0xb88 [<00000000404a6ae0>] unmap_single_vma+0xc0/0x188 [<00000000404a6cdc>] zap_page_range_single+0x134/0x1f8 [<00000000404a702c>] unmap_mapping_range+0x1cc/0x208 [<0000000040461518>] truncate_pagecache+0x98/0x108 [<0000000040461624>] truncate_setsize+0x9c/0xb8 [<00000000405d7f30>] put_aio_ring_file+0x80/0x100 [<00000000405d803c>] aio_free_ring+0x8c/0x290 [<00000000405d82c0>] free_ioctx+0x80/0x180 [<0000000040284e6c>] process_one_work+0x21c/0x668 [<00000000402854c4>] worker_thread+0x20c/0x778 [<0000000040291d44>] kthread+0x2d4/0x2e0 [<0000000040204020>] end_fault_vector+0x20/0xc0 This indicates that we need to handle the no context case in flush_cache_range() as we do in flush_cache_mm(). In thinking about this, I realized that we don't need to flush the TLB when there is no context. So, I added context checks to the large flush cases in flush_cache_mm() and flush_cache_range(). The large flush case occurs frequently in flush_cache_mm() and the change should improve fork performance. The v2 version of this change removes the BUG_ON from flush_cache_page() by skipping the TLB flush when there is no context. I also added code to flush the TLB in flush_cache_mm() and flush_cache_range() when we have a context that's not current. Now all three routines handle TLB flushes in a similar manner. Signed-off-by: John David Anglin <[email protected]> Cc: [email protected] # 4.9+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 542ed8145e6f9392e3d0a86a0e9027d2ffd183e4 ] Access to genmask field in struct nft_set_ext results in unaligned atomic read: [ 72.130109] Unable to handle kernel paging request at virtual address ffff0000c2bb708c [ 72.131036] Mem abort info: [ 72.131213] ESR = 0x0000000096000021 [ 72.131446] EC = 0x25: DABT (current EL), IL = 32 bits [ 72.132209] SET = 0, FnV = 0 [ 72.133216] EA = 0, S1PTW = 0 [ 72.134080] FSC = 0x21: alignment fault [ 72.135593] Data abort info: [ 72.137194] ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 [ 72.142351] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 72.145989] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 72.150115] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000237d27000 [ 72.154893] [ffff0000c2bb708c] pgd=0000000000000000, p4d=180000023ffff403, pud=180000023f84b403, pmd=180000023f835403, +pte=0068000102bb7707 [ 72.163021] Internal error: Oops: 0000000096000021 [#1] SMP [...] [ 72.170041] CPU: 7 UID: 0 PID: 54 Comm: kworker/7:0 Tainted: G E 6.13.0-rc3+ #2 [ 72.170509] Tainted: [E]=UNSIGNED_MODULE [ 72.170720] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-stable202302-for-qemu 03/01/2023 [ 72.171192] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 72.171552] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 72.171915] pc : nft_rhash_gc+0x200/0x2d8 [nf_tables] [ 72.172166] lr : nft_rhash_gc+0x128/0x2d8 [nf_tables] [ 72.172546] sp : ffff800081f2bce0 [ 72.172724] x29: ffff800081f2bd40 x28: ffff0000c2bb708c x27: 0000000000000038 [ 72.173078] x26: ffff0000c6780ef0 x25: ffff0000c643df00 x24: ffff0000c6778f78 [ 72.173431] x23: 000000000000001a x22: ffff0000c4b1f000 x21: ffff0000c6780f78 [ 72.173782] x20: ffff0000c2bb70dc x19: ffff0000c2bb7080 x18: 0000000000000000 [ 72.174135] x17: ffff0000c0a4e1c0 x16: 0000000000003000 x15: 0000ac26d173b978 [ 72.174485] x14: ffffffffffffffff x13: 0000000000000030 x12: ffff0000c6780ef0 [ 72.174841] x11: 0000000000000000 x10: ffff800081f2bcf8 x9 : ffff0000c3000000 [ 72.175193] x8 : 00000000000004be x7 : 0000000000000000 x6 : 0000000000000000 [ 72.175544] x5 : 0000000000000040 x4 : ffff0000c3000010 x3 : 0000000000000000 [ 72.175871] x2 : 0000000000003a98 x1 : ffff0000c2bb708c x0 : 0000000000000004 [ 72.176207] Call trace: [ 72.176316] nft_rhash_gc+0x200/0x2d8 [nf_tables] (P) [ 72.176653] process_one_work+0x178/0x3d0 [ 72.176831] worker_thread+0x200/0x3f0 [ 72.176995] kthread+0xe8/0xf8 [ 72.177130] ret_from_fork+0x10/0x20 [ 72.177289] Code: 54fff984 d503201f d2800080 91003261 (f820303f) [ 72.177557] ---[ end trace 0000000000000000 ]--- Align struct nft_set_ext to word size to address this and documentation it. pahole reports that this increases the size of elements for rhash and pipapo in 8 bytes on x86_64. Fixes: 7ffc7481153b ("netfilter: nft_set_hash: skip duplicated elements pending gc run") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b06a6187ef983f501e93faa56209169752d3bde3 ] Initialize meter_urb array before use in mixer_us16x08.c. CID 1410197: (#1 of 1): Uninitialized scalar variable (UNINIT) uninit_use_in_call: Using uninitialized value *meter_urb when calling get_meter_levels_from_urb. Coverity Link: https://scan7.scan.coverity.com/#/project-view/52849/11354?selectedIssue=1410197 Fixes: d2bb390 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Signed-off-by: Tanya Agarwal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4f619d518db9cd1a933c3a095a5f95d0c1584ae8 ] When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released. BUG: unable to handle page fault for address: fffffffffffffff8 PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:complete_all+0x3e/0xa0 [...] Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? complete_all+0x3e/0xa0 fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xd8/0x110 ? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)] ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> [...] CR2: fffffffffffffff8 ---[ end trace 0000000000000000 ]--- Use the reference counter to ensure safe release as Sergey suggests: https://lore.kernel.org/all/[email protected]/ Fixes: 13e920d ("net: wwan: t7xx: Add core components") Signed-off-by: Jinjian Song <[email protected]> Acked-by: Sergey Ryazanov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 77ee7a6d16b6ec07b5c3ae2b6b60a24c1afbed09 ] Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_tci() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 9e 6c 26 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 3a 5a 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90003baf5b8 EFLAGS: 00010286 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 8565c1eec37aa000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802616fb50 R08: ffffffff817f0a4c R09: 1ffff92000775e50 R10: dffffc0000000000 R11: fffff52000775e51 R12: 0000000000000140 R13: ffff88807a1d5800 R14: ffff88807a1d5810 R15: 0000000000000014 FS: 00007fa03261f6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd65753000 CR3: 0000000031720000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_tci+0x272/0x550 net/packet/af_packet.c:565 packet_recvmsg+0x13c9/0x1ef0 net/packet/af_packet.c:3616 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1066 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2814 ___sys_recvmsg net/socket.c:2856 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2951 __sys_recvmmsg net/socket.c:3025 [inline] __do_sys_recvmmsg net/socket.c:3048 [inline] __se_sys_recvmmsg net/socket.c:3041 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3041 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Fixes: 79eecf6 ("af_packet: Handle outgoing VLAN packets without hardware offloading") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Cc: Chengen Du <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f91a5b8089389eb408501af2762f168c3aaa7b79 ] Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_protocol_dgram() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5892 Comm: syz-executor883 Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 86 d5 25 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 5a 69 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900038d7638 EFLAGS: 00010282 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 609ffd18ea660600 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802483c8d0 R08: ffffffff817f0a8c R09: 1ffff9200071ae60 R10: dffffc0000000000 R11: fffff5200071ae61 R12: 0000000000000140 R13: ffff88807fc8e400 R14: ffff88807fc8e3f4 R15: 0000000000000011 FS: 00007fbac5e006c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbac5e00d58 CR3: 000000001238e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_protocol_dgram+0x165/0x290 net/packet/af_packet.c:585 packet_recvmsg+0x948/0x1ef0 net/packet/af_packet.c:3552 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1055 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2940 __sys_recvmmsg net/socket.c:3014 [inline] __do_sys_recvmmsg net/socket.c:3037 [inline] __se_sys_recvmmsg net/socket.c:3030 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3030 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 79eecf6 ("af_packet: Handle outgoing VLAN packets without hardware offloading") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Cc: Chengen Du <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4d94f05558271654670d18c26c912da0c1c15549 ] This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 4 locks held by kworker/u9:2/5070: #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 #2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915 CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline] hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939 hci_event_func net/bluetooth/hci_event.c:7514 [inline] hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> Reported-by: [email protected] Tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614 Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…nt message commit cddc76b165161a02ff14c4d84d0f5266d9d32b9e upstream. Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 #1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 #3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 #4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 #5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ #34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information. Link: https://lkml.kernel.org/r/[email protected] Fixes: 3a6f33d ("mm/kmemleak: use %pK to display kernel pointers in backtrace") Signed-off-by: Alessandro Carminati <[email protected]> Acked-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: Clément Léger <[email protected]> Cc: Alessandro Carminati <[email protected]> Cc: Eric Chanudet <[email protected]> Cc: Gabriele Paoloni <[email protected]> Cc: Juri Lelli <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Weißschuh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…le_direct_reclaim() commit 6aaced5abd32e2a57cd94fd64f824514d0361da8 upstream. The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit cbb26f7d8451fe56ccac802c6db48d16240feebd upstream. Syzbot reported the following splat: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline] RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552 Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83 RSP: 0000:ffffc90003916c90 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007 R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_page_unref include/linux/skbuff_ref.h:43 [inline] __skb_frag_unref include/linux/skbuff_ref.h:56 [inline] skb_release_data+0x483/0x8a0 net/core/skbuff.c:1119 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb+0x55/0x70 net/core/skbuff.c:1204 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3436 [inline] tcp_ack+0x2442/0x6bc0 net/ipv4/tcp_input.c:4032 tcp_rcv_state_process+0x8eb/0x44e0 net/ipv4/tcp_input.c:6805 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5672 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5785 process_backlog+0x662/0x15b0 net/core/dev.c:6117 __napi_poll+0xcb/0x490 net/core/dev.c:6883 napi_poll net/core/dev.c:6952 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:7074 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x57/0xc0 arch/x86/kernel/apic/apic.c:1049 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0033:0x7f34f4519ad5 Code: 85 d2 74 0d 0f 10 02 48 8d 54 24 20 0f 11 44 24 20 64 8b 04 25 18 00 00 00 85 c0 75 27 41 b8 08 00 00 00 b8 0f 01 00 00 0f 05 <48> 3d 00 f0 ff ff 76 75 48 8b 15 24 73 0d 00 f7 d8 64 89 02 48 83 RSP: 002b:00007ffec5b32ce0 EFLAGS: 00000246 RAX: 0000000000000001 RBX: 00000000000668a0 RCX: 00007f34f4519ad5 RDX: 00007ffec5b32d00 RSI: 0000000000000004 RDI: 0000564f4bc6cae0 RBP: 0000564f4bc6b5a0 R08: 0000000000000008 R09: 0000000000000000 R10: 00007ffec5b32de8 R11: 0000000000000246 R12: 0000564f48ea8aa4 R13: 0000000000000001 R14: 0000564f48ea93e8 R15: 00007ffec5b32d68 </TASK> Eric noted a probable shinfo->nr_frags corruption, which indeed occurs. The root cause is a buggy MPTCP option len computation in some circumstances: the ADD_ADDR option should be mutually exclusive with DSS since the blamed commit. Still, mptcp_established_options_add_addr() tries to set the relevant info in mptcp_out_options, if the remaining space is large enough even when DSS is present. Since the ADD_ADDR infos and the DSS share the same union fields, adding first corrupts the latter. In the worst-case scenario, such corruption increases the DSS binary layout, exceeding the computed length and possibly overwriting the skb shared info. Address the issue by enforcing mutual exclusion in mptcp_established_options_add_addr(), too. Cc: [email protected] Reported-by: [email protected] Closes: multipath-tcp/mptcp_net-next#538 Fixes: 1bff1e4 ("mptcp: optimize out option generation") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/025d9df8cde3c9a557befc47e9bc08fbbe3476e5.1734771049.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 6aecd91a5c5b68939cf4169e32bc49f3cd2dd329 ] [BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6 ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547 ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 42437a6 ("btrfs: introduce mount option rescue=ignorebadroots") Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2d2d4f60ed266a8f340a721102d035252606980b ] We found a timeout problem with the pldm command on our system. The reason is that the MCTP-I3C driver has a race condition when receiving multiple-packet messages in multi-thread, resulting in a wrong packet order problem. We identified this problem by adding a debug message to the mctp_i3c_read function. According to the MCTP spec, a multiple-packet message must be composed in sequence, and if there is a wrong sequence, the whole message will be discarded and wait for the next SOM. For example, SOM → Pkt Seq #2 → Pkt Seq #1 → Pkt Seq #3 → EOM. Therefore, we try to solve this problem by adding a mutex to the mctp_i3c_read function. Before the modification, when a command requesting a multiple-packet message response is sent consecutively, an error usually occurs within 100 loops. After the mutex, it can go through 40000 loops without any error, and it seems to run well. Fixes: c8755b2 ("mctp i3c: MCTP I3C driver") Signed-off-by: Leo Yang <[email protected]> Link: https://patch.msgid.link/[email protected] [[email protected]: dropped already answered question from changelog] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0e2909c6bec9048f49d0c8e16887c63b50b14647 ] When cmd_alloc_index(), fails cmd_work_handler() needs to complete ent->slotted before returning early. Otherwise the task which issued the command may hang: mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry INFO: task kworker/13:2:4055883 blocked for more than 120 seconds. Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/13:2 D 0 4055883 2 0x00000228 Workqueue: events mlx5e_tx_dim_work [mlx5_core] Call trace: __switch_to+0xe8/0x150 __schedule+0x2a8/0x9b8 schedule+0x2c/0x88 schedule_timeout+0x204/0x478 wait_for_common+0x154/0x250 wait_for_completion+0x28/0x38 cmd_exec+0x7a0/0xa00 [mlx5_core] mlx5_cmd_exec+0x54/0x80 [mlx5_core] mlx5_core_modify_cq+0x6c/0x80 [mlx5_core] mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core] mlx5e_tx_dim_work+0x54/0x68 [mlx5_core] process_one_work+0x1b0/0x448 worker_thread+0x54/0x468 kthread+0x134/0x138 ret_from_fork+0x10/0x18 Fixes: 485d65e ("net/mlx5: Add a timeout to acquire the command queue semaphore") Signed-off-by: Chenguang Zhao <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Acked-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9ab4981552930a9c45682d62424ba610edc3992d ] If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956 Fixes: c9474b7 ("drm/xe: Wedge the entire device") Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]> (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) Signed-off-by: Thomas Hellström <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit d38e26e36206ae3d544d496513212ae931d1da0a upstream. Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 ---------------- Code disassembly (best guess), 1 bytes skipped: 0: 42 80 3c 38 00 cmpb $0x0,(%rax,%r15,1) 5: 0f 85 fe 02 00 00 jne 0x309 b: 4d 8b a4 24 08 09 00 mov 0x908(%r12),%r12 12: 00 13: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1a: fc ff df 1d: 49 8d 7c 24 28 lea 0x28(%r12),%rdi 22: 48 89 fa mov %rdi,%rdx 25: 48 c1 ea 03 shr $0x3,%rdx * 29: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction 2d: 0f 85 cc 02 00 00 jne 0x2ff 33: 4d 8b 7c 24 28 mov 0x28(%r12),%r15 38: 48 rex.W 39: 8d .byte 0x8d 3a: 84 24 c8 test %ah,(%rax,%rcx,8) Here with 'net.mptcp.scheduler', the 'net' structure is not really needed, because the table->data already has a pointer to the current scheduler, the only thing needed from the per-netns data. Simply use 'data', instead of getting (most of the time) the same thing, but from a longer and indirect way. Fixes: 6963c50 ("mptcp: only allow set existing scheduler for net.mptcp.scheduler") Cc: [email protected] Reported-by: [email protected] Closes: https://lore.kernel.org/[email protected] Suggested-by: Al Viro <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0ee4736c003daded513de0ff112d4a1e9c85bbab upstream. Since the input data length passed to zlib_compress_folios() can be arbitrary, always setting strm.avail_in to a multiple of PAGE_SIZE may cause read-in bytes to exceed the input range. Currently this triggers an assert in btrfs_compress_folios() on the debug kernel (see below). Fix strm.avail_in calculation for S390 hardware acceleration path. assertion failed: *total_in <= orig_len, in fs/btrfs/compression.c:1041 ------------[ cut here ]------------ kernel BUG at fs/btrfs/compression.c:1041! monitor event: 0040 ilc:2 [#1] PREEMPT SMP CPU: 16 UID: 0 PID: 325 Comm: kworker/u273:3 Not tainted 6.13.0-20241204.rc1.git6.fae3b21430ca.300.fc41.s390x+debug #1 Hardware name: IBM 3931 A01 703 (z/VM 7.4.0) Workqueue: btrfs-delalloc btrfs_work_helper Krnl PSW : 0704d00180000000 0000021761df6538 (btrfs_compress_folios+0x198/0x1a0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 0000000080000000 0000000000000001 0000000000000047 0000000000000000 0000000000000006 ffffff01757bb000 000001976232fcc0 000000000000130c 000001976232fcd0 000001976232fcc8 00000118ff4a0e30 0000000000000001 00000111821ab400 0000011100000000 0000021761df6534 000001976232fb58 Krnl Code: 0000021761df6528: c020006f5ef4 larl %r2,0000021762be2310 0000021761df652e: c0e5ffbd09d5 brasl %r14,00000217615978d8 #0000021761df6534: af000000 mc 0,0 >0000021761df6538: 0707 bcr 0,%r7 0000021761df653a: 0707 bcr 0,%r7 0000021761df653c: 0707 bcr 0,%r7 0000021761df653e: 0707 bcr 0,%r7 0000021761df6540: c004004bb7ec brcl 0,000002176276d518 Call Trace: [<0000021761df6538>] btrfs_compress_folios+0x198/0x1a0 ([<0000021761df6534>] btrfs_compress_folios+0x194/0x1a0) [<0000021761d97788>] compress_file_range+0x3b8/0x6d0 [<0000021761dcee7c>] btrfs_work_helper+0x10c/0x160 [<0000021761645760>] process_one_work+0x2b0/0x5d0 [<000002176164637e>] worker_thread+0x20e/0x3e0 [<000002176165221a>] kthread+0x15a/0x170 [<00000217615b859c>] __ret_from_fork+0x3c/0x60 [<00000217626e72d2>] ret_from_fork+0xa/0x38 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000021761597924>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops Fixes: fd1e75d ("btrfs: make compression path to be subpage compatible") CC: [email protected] # 6.12+ Acked-by: Ilya Leoshkevich <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Mikhail Zaslonko <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 6a97f4118ac07cfdc316433f385dbdc12af5025e upstream. die() can be called in exception handler, and therefore cannot sleep. However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled. That causes the following warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex preempt_count: 110001, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234 Hardware name: riscv-virtio,qemu (DT) Call Trace: dump_backtrace+0x1c/0x24 show_stack+0x2c/0x38 dump_stack_lvl+0x5a/0x72 dump_stack+0x14/0x1c __might_resched+0x130/0x13a rt_spin_lock+0x2a/0x5c die+0x24/0x112 do_trap_insn_illegal+0xa0/0xea _new_vmalloc_restore_context_a0+0xcc/0xd8 Oops - illegal instruction [#1] Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT enabled. Fixes: 76d2a04 ("RISC-V: Init and Halt Code") Signed-off-by: Nam Cao <[email protected]> Cc: [email protected] Reviewed-by: Sebastian Andrzej Siewior <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5225fd2a26211d012533acf98a6ad3f983885817 upstream. dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <[email protected]> Co-developed-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit ab75a0d2e07942ae15d32c0a5092fd336451378c) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7de8d5c90be9ad9f6575e818a674801db2ada794 upstream. DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Suggested-by: Leo Li <[email protected]> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 862a9c0f68487fd6ced15622d9cdcec48f8b5aaa upstream. The tcpci_irq() may meet below NULL pointer dereference issue: [ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 2.641951] status 0x1, 0x37f [ 2.650659] Mem abort info: [ 2.656490] ESR = 0x0000000096000004 [ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.665532] SET = 0, FnV = 0 [ 2.668579] EA = 0, S1PTW = 0 [ 2.671715] FSC = 0x04: level 0 translation fault [ 2.676584] Data abort info: [ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.695284] [0000000000000010] user address but active_mm is swapper [ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 2.707883] Modules linked in: [ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4 [ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.732989] pc : tcpci_irq+0x38/0x318 [ 2.736647] lr : _tcpci_irq+0x14/0x20 [ 2.740295] sp : ffff80008324bd30 [ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70 [ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000 [ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000 [ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001 [ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040 [ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a [ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00 [ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031 [ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002 [ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000 [ 2.814838] Call trace: [ 2.817273] tcpci_irq+0x38/0x318 [ 2.820583] _tcpci_irq+0x14/0x20 [ 2.823885] irq_thread_fn+0x2c/0xa8 [ 2.827456] irq_thread+0x16c/0x2f4 [ 2.830940] kthread+0x110/0x114 [ 2.834164] ret_from_fork+0x10/0x20 [ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60) This may happen on shared irq case. Such as two Type-C ports share one irq. After the first port finished tcpci_register_port(), it may trigger interrupt. However, if the interrupt comes by chance the 2nd port finishes devm_request_threaded_irq(), the 2nd port interrupt handler will run at first. Then the above issue happens due to tcpci is still a NULL pointer in tcpci_irq() when dereference to regmap. devm_request_threaded_irq() <-- port1 irq comes disable_irq(client->irq); tcpci_register_port() This will restore the logic to the state before commit (77e8510 "usb: typec: tcpci: support edge irq"). However, moving tcpci_register_port() earlier creates a problem when use edge irq because tcpci_init() will be called before devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to the hardware to tell it to start generating interrupts but we're not ready to deal with them yet, then the ALERT events may be missed and ALERT line will not recover to high level forever. To avoid the issue, this will also set ALERT_MASK register after devm_request_threaded_irq() return. Fixes: 77e8510 ("usb: typec: tcpci: support edge irq") Cc: stable <[email protected]> Tested-by: Emanuele Ghidoli <[email protected]> Signed-off-by: Xu Yang <[email protected]> Reviewed-by: Francesco Dolcini <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2774f25 ] With numa balancing on, when a numa system is running where a numa node doesn't have its local memory so it has no managed zones, the following oops has been observed. It's because wakeup_kswapd() is called with a wrong zone index, -1. Fixed it by checking the index before calling wakeup_kswapd(). > BUG: unable to handle page fault for address: 00000000000033f3 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops: 0000 [intel#1] PREEMPT SMP NOPTI > CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS > rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 > RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812) > Code: (omitted) > RSP: 0000:ffffc90004257d58 EFLAGS: 00010286 > RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88883fff0480 > RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff > R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff88883fff0940 > FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00000000000033f3 CR3: 000000026cc08004 CR4: 0000000000770ee0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: > <TASK> > ? __die > ? page_fault_oops > ? __pte_offset_map_lock > ? exc_page_fault > ? asm_exc_page_fault > ? wakeup_kswapd > migrate_misplaced_page > __handle_mm_fault > handle_mm_fault > do_user_addr_fault > exc_page_fault > asm_exc_page_fault > RIP: 0033:0x55b897ba0808 > Code: (omitted) > RSP: 002b:00007ffeefa821a0 EFLAGS: 00010287 > RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0 > RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0 > RBP: 00007ffeefa821a0 R08: 0000000000000037 R09: 0000000000000075 > R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 > R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000 > </TASK> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Byungchul Park <[email protected]> Reported-by: Hyeongtak Ji <[email protected]> Fixes: c574bbe ("NUMA balancing: optimize page placement for memory tiering system") Reviewed-by: Oscar Salvador <[email protected]> Cc: Baolin Wang <[email protected]> Cc: "Huang, Ying" <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5d92c7c ] If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [intel#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 intel#44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally. Fixes: 633273a ("libata-pmp: hook PMP support and enable it") Cc: [email protected] Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: John Garry <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Niklas Cassel <[email protected]> Stable-dep-of: f6549f5 ("ata,scsi: libata-core: Do not leak memory for ata_port struct members") Signed-off-by: Sasha Levin <[email protected]>

…mit_queues' Writing 'power' and 'submit_queues' concurrently will trigger kernel panic: Test script: modprobe null_blk nr_devices=0 mkdir -p /sys/kernel/config/nullb/nullb0 while true; do echo 1 > submit_queues; echo 4 > submit_queues; done & while true; do echo 1 > power; echo 0 > power; done Test result: BUG: kernel NULL pointer dereference, address: 0000000000000148 Oops: 0000 [intel#1] PREEMPT SMP RIP: 0010:__lock_acquire+0x41d/0x28f0 Call Trace: <TASK> lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150 This is because del_gendisk() can concurrent with blk_mq_update_nr_hw_queues(): nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULL Fix this problem by resuing the global mutex to protect nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs. Fixes: 45919fb ("null_blk: Enable modifying 'submit_queues' after an instance has been configured") Reported-and-tested-by: Yi Zhang <[email protected]> Closes: https://lore.kernel.org/all/CAHj4cs9LgsHLnjg8z06LQ3Pr5cax-+Ps+xT7AP7TPnEjStuwZA@mail.gmail.com/ Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Zhu Yanjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

[ Upstream commit 2aeeef9 ] In the cited commit, bond->ipsec_lock is added to protect ipsec_list, hence xdo_dev_state_add and xdo_dev_state_delete are called inside this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep, "scheduling while atomic" will be triggered when changing bond's active slave. [ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200 [ 101.055726] Modules linked in: [ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ intel#1 [ 101.058760] Hardware name: [ 101.059434] Call Trace: [ 101.059436] <TASK> [ 101.060873] dump_stack_lvl+0x51/0x60 [ 101.061275] __schedule_bug+0x4e/0x60 [ 101.061682] __schedule+0x612/0x7c0 [ 101.062078] ? __mod_timer+0x25c/0x370 [ 101.062486] schedule+0x25/0xd0 [ 101.062845] schedule_timeout+0x77/0xf0 [ 101.063265] ? asm_common_interrupt+0x22/0x40 [ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10 [ 101.064215] __wait_for_common+0x87/0x190 [ 101.064648] ? usleep_range_state+0x90/0x90 [ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core] [ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core] [ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core] [ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core] [ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.067738] ? kmalloc_trace+0x4d/0x350 [ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core] [ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core] [ 101.069312] bond_change_active_slave+0x392/0x900 [bonding] [ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding] [ 101.070454] __bond_opt_set+0xa6/0x430 [bonding] [ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding] [ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding] [ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0 [ 101.073033] vfs_write+0x2d8/0x400 [ 101.073416] ? alloc_fd+0x48/0x180 [ 101.073798] ksys_write+0x5f/0xe0 [ 101.074175] do_syscall_64+0x52/0x110 [ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53 As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called from bond_change_active_slave, which requires holding the RTNL lock. And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user context. So ipsec_lock doesn't have to be spin lock, change it to mutex, and thus the above issue can be resolved. Fixes: 9a56055 ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 8151a6c upstream. [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [intel#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 intel#1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…acntion commit c3b47f4 upstream. [BUG] Syzbot reported a NULL pointer dereference with the following crash: FAULT_INJECTION: forcing a failure. start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676 prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642 relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678 ... BTRFS info (device loop0): balance: ended with status: -12 Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [intel#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667] RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926 Call Trace: <TASK> commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496 btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430 del_balance_item fs/btrfs/volumes.c:3678 [inline] reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742 btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] The allocation failure happens at the start_transaction() inside prepare_to_relocate(), and during the error handling we call unset_reloc_control(), which makes fs_info->balance_ctl to be NULL. Then we continue the error path cleanup in btrfs_balance() by calling reset_balance_state() which will call del_balance_item() to fully delete the balance item in the root tree. However during the small window between set_reloc_contrl() and unset_reloc_control(), we can have a subvolume tree update and created a reloc_root for that subvolume. Then we go into the final btrfs_commit_transaction() of del_balance_item(), and into btrfs_update_reloc_root() inside commit_fs_roots(). That function checks if fs_info->reloc_ctl is in the merge_reloc_tree stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer dereference. [FIX] Just add extra check on fs_info->reloc_ctl inside btrfs_update_reloc_root(), before checking fs_info->reloc_ctl->merge_reloc_tree. That DEAD_RELOC_TREE handling is to prevent further modification to the reloc tree during merge stage, but since there is no reloc_ctl at all, we do not need to bother that. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ CC: [email protected] # 4.19+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 3cf7423 ] If qi_submit_sync() is invoked with 0 invalidation descriptors (for instance, for DMA draining purposes), we can run into a bug where a submitting thread fails to detect the completion of invalidation_wait. Subsequently, this led to a soft lockup. Currently, there is no impact by this bug on the existing users because no callers are submitting invalidations with 0 descriptors. This fix will enable future users (such as DMA drain) calling qi_submit_sync() with 0 count. Suppose thread T1 invokes qi_submit_sync() with non-zero descriptors, while concurrently, thread T2 calls qi_submit_sync() with zero descriptors. Both threads then enter a while loop, waiting for their respective descriptors to complete. T1 detects its completion (i.e., T1's invalidation_wait status changes to QI_DONE by HW) and proceeds to call reclaim_free_desc() to reclaim all descriptors, potentially including adjacent ones of other threads that are also marked as QI_DONE. During this time, while T2 is waiting to acquire the qi->q_lock, the IOMMU hardware may complete the invalidation for T2, setting its status to QI_DONE. However, if T1's execution of reclaim_free_desc() frees T2's invalidation_wait descriptor and changes its status to QI_FREE, T2 will not observe the QI_DONE status for its invalidation_wait and will indefinitely remain stuck. This soft lockup does not occur when only non-zero descriptors are submitted.In such cases, invalidation descriptors are interspersed among wait descriptors with the status QI_IN_USE, acting as barriers. These barriers prevent the reclaim code from mistakenly freeing descriptors belonging to other submitters. Considered the following example timeline: T1 T2 ======================================== ID1 WD1 while(WD1!=QI_DONE) unlock lock WD1=QI_DONE* WD2 while(WD2!=QI_DONE) unlock lock WD1==QI_DONE? ID1=QI_DONE WD2=DONE* reclaim() ID1=FREE WD1=FREE WD2=FREE unlock soft lockup! T2 never sees QI_DONE in WD2 Where: ID = invalidation descriptor WD = wait descriptor * Written by hardware The root of the problem is that the descriptor status QI_DONE flag is used for two conflicting purposes: 1. signal a descriptor is ready for reclaim (to be freed) 2. signal by the hardware that a wait descriptor is complete The solution (in this patch) is state separation by using QI_FREE flag for intel#1. Once a thread's invalidation descriptors are complete, their status would be set to QI_FREE. The reclaim_free_desc() function would then only free descriptors marked as QI_FREE instead of those marked as QI_DONE. This change ensures that T2 (from the previous example) will correctly observe the completion of its invalidation_wait (marked as QI_DONE). Signed-off-by: Sanjay K Kumar <[email protected]> Signed-off-by: Jacob Pan <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 1dae9f1 upstream. The kernel may crash when deleting a genetlink family if there are still listeners for that family: Oops: Kernel access of bad area, sig: 11 [intel#1] ... NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0 LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0 Call Trace: __netlink_clear_multicast_users+0x74/0xc0 genl_unregister_family+0xd4/0x2d0 Change the unsafe loop on the list to a safe one, because inside the loop there is an element removal from this list. Fixes: b827357 ("genetlink: fix netns vs. netlink table locking (2)") Cc: [email protected] Signed-off-by: Anastasia Kovaleva <[email protected]> Reviewed-by: Dmitry Bogdanov <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7d1fd36 upstream. When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [intel#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 intel#1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: [email protected] # v5.15+ Closes: raspberrypi/linux#6389 Fixes: 26a4dc2 ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Juan A. Suarez <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 3cb7cf1 ] Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [intel#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] <TASK> [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.810950] tbf_reset (./include/linux/timekeeping.h:169 net/sched/sch_tbf.c:334) sch_tbf [ 88.811208] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.811484] netif_set_real_num_tx_queues (./include/linux/spinlock.h:396 ./include/net/sch_generic.h:768 net/core/dev.c:2958) [ 88.811870] __tun_detach (drivers/net/tun.c:590 drivers/net/tun.c:673) [ 88.812271] tun_chr_close (drivers/net/tun.c:702 drivers/net/tun.c:3517) [ 88.812505] __fput (fs/file_table.c:432 (discriminator 1)) [ 88.812735] task_work_run (kernel/task_work.c:230) [ 88.813016] do_exit (kernel/exit.c:940) [ 88.813372] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 88.813639] ? handle_mm_fault (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/memcontrol.h:1022 ./include/linux/memcontrol.h:1045 ./include/linux/memcontrol.h:1052 mm/memory.c:5928 mm/memory.c:6088) [ 88.813867] do_group_exit (kernel/exit.c:1070) [ 88.814138] __x64_sys_exit_group (kernel/exit.c:1099) [ 88.814490] x64_sys_call (??:?) [ 88.814791] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 88.815012] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 88.815495] RIP: 0033:0x7f44560f1975 Fixes: 175f9c1 ("net_sched: Add size table for qdiscs") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Daniel Borkmann <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 330a699 ] Commit 004d250 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [intel#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. Signed-off-by: Mohamed Khalfella <[email protected]> Reviewed-by: Yuanyuan Zhong <[email protected]> Fixes: 004d250 ("igb: Fix igb_down hung on surprise removal") Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Does this kernel support the Intel® Media Server Studio 2017 R3? #1

Does this kernel support the Intel® Media Server Studio 2017 R3? #1

pauldotknopf commented Feb 28, 2018

Does this kernel support the Intel® Media Server Studio 2017 R3? #1

Does this kernel support the Intel® Media Server Studio 2017 R3? #1

Comments

pauldotknopf commented Feb 28, 2018