Bump debug, tcp-port-used and nightwatch

[dependabot]

Bumps debug to 4.3.4 and updates ancestor dependencies debug, tcp-port-used and nightwatch. These dependencies need to be updated together.

Updates debug from 4.1.1 to 4.3.4

Release notes

Sourced from debug's releases.

4.3.4

What's Changed

• Add section about configuring JS console to show debug messages by @​gitname in debug-js/debug#866
• Replace deprecated String.prototype.substr() by @​CommanderRoot in debug-js/debug#876

New Contributors

• @​gitname made their first contribution in debug-js/debug#866
• @​CommanderRoot made their first contribution in debug-js/debug#876

Full Changelog: debug-js/debug@4.3.3...4.3.4

4.3.3

Patch Release 4.3.3

This is a documentation-only release. Further, the repository was transferred. Please see notes below.

• Migrates repository from https://github.com/visionmedia/debug to https://github.com/debug-js/debug. Please see notes below as to why this change was made.
• Updates repository maintainership information
• Updates the copyright (no license terms change has been made)
• Removes accidental epizeuxis (#828)
• Adds README section regarding usage in child procs (#850)

Thank you to @​taylor1791 and @​kristofkalocsai for their contributions.

---

Repository Migration Information

I've formatted this as a FAQ, please feel free to open an issue for any additional question and I'll add the response here.

Q: What impact will this have on me?

In most cases, you shouldn't notice any change.

The only exception I can think of is if you pull code directly from https://github.com/visionmedia/debug, e.g. via a "debug": "visionmedia/debug"-type version entry in your package.json - in which case, you should still be fine due to the automatic redirection Github sets up, but you should also update any references as soon as possible.

Q: What are the security implications of this change?

If you pull code directly from the old URL, you should update the URL to https://github.com/debug-js/debug as soon as possible. The old organization has many approved owners and thus a new repository could (in theory) be created at the old URL, circumventing Github's automatic redirect that is in place now and serving malicious code. I (@​qix-) also wouldn't have access to that repository, so while I don't think it would happen, it's still something to consider.

Even in such a case, however, the officially released package on npm (debug) would not be affected. That package is still very much under control (even more than it used to be).

Q: What should I do if I encounter an issue related to the migration?

Search the issues first to see if someone has already reported it, and then open a new issue if someone has not.

Q: Why was this done as a 'patch' release? Isn't this breaking?

No, it shouldn't be breaking. The package on npm shouldn't be affected (aside from this patch release) and any references to the old repository should automatically redirect.

Thus, according to all of the "APIs" (loosely put) involved, nothing should have broken.

... (truncated)

Commits

• da66c86 4.3.4
• 9b33412 replace deprecated String.prototype.substr() (#876)
• c0805cc add section about configuring JS console to show debug messages (#866)
• 043d3cd 4.3.3
• 4079aae update license and more maintainership information
• 19b36c0 update repository location + maintainership information
• f851b00 adds README section regarding usage in child procs (#850)
• d177f2b Remove accidental epizeuxis
• e47f96d 4.3.2
• 1e9d38c cache enabled status per-logger (#799)
• Additional commits viewable in compare view

Maintainer changes

This version was pushed to npm by qix, a new releaser for debug since your current version.

Updates debug from 3.2.6 to 4.3.4

Release notes

Sourced from debug's releases.

4.3.4

What's Changed

• Add section about configuring JS console to show debug messages by @​gitname in debug-js/debug#866
• Replace deprecated String.prototype.substr() by @​CommanderRoot in debug-js/debug#876

New Contributors

• @​gitname made their first contribution in debug-js/debug#866
• @​CommanderRoot made their first contribution in debug-js/debug#876

Full Changelog: debug-js/debug@4.3.3...4.3.4

4.3.3

Patch Release 4.3.3

This is a documentation-only release. Further, the repository was transferred. Please see notes below.

• Migrates repository from https://github.com/visionmedia/debug to https://github.com/debug-js/debug. Please see notes below as to why this change was made.
• Updates repository maintainership information
• Updates the copyright (no license terms change has been made)
• Removes accidental epizeuxis (#828)
• Adds README section regarding usage in child procs (#850)

Thank you to @​taylor1791 and @​kristofkalocsai for their contributions.

---

Repository Migration Information

I've formatted this as a FAQ, please feel free to open an issue for any additional question and I'll add the response here.

Q: What impact will this have on me?

In most cases, you shouldn't notice any change.

The only exception I can think of is if you pull code directly from https://github.com/visionmedia/debug, e.g. via a "debug": "visionmedia/debug"-type version entry in your package.json - in which case, you should still be fine due to the automatic redirection Github sets up, but you should also update any references as soon as possible.

Q: What are the security implications of this change?

If you pull code directly from the old URL, you should update the URL to https://github.com/debug-js/debug as soon as possible. The old organization has many approved owners and thus a new repository could (in theory) be created at the old URL, circumventing Github's automatic redirect that is in place now and serving malicious code. I (@​qix-) also wouldn't have access to that repository, so while I don't think it would happen, it's still something to consider.

Even in such a case, however, the officially released package on npm (debug) would not be affected. That package is still very much under control (even more than it used to be).

Q: What should I do if I encounter an issue related to the migration?

Search the issues first to see if someone has already reported it, and then open a new issue if someone has not.

Q: Why was this done as a 'patch' release? Isn't this breaking?

No, it shouldn't be breaking. The package on npm shouldn't be affected (aside from this patch release) and any references to the old repository should automatically redirect.

Thus, according to all of the "APIs" (loosely put) involved, nothing should have broken.

... (truncated)

Commits

• da66c86 4.3.4
• 9b33412 replace deprecated String.prototype.substr() (#876)
• c0805cc add section about configuring JS console to show debug messages (#866)
• 043d3cd 4.3.3
• 4079aae update license and more maintainership information
• 19b36c0 update repository location + maintainership information
• f851b00 adds README section regarding usage in child procs (#850)
• d177f2b Remove accidental epizeuxis
• e47f96d 4.3.2
• 1e9d38c cache enabled status per-logger (#799)
• Additional commits viewable in compare view

Maintainer changes

This version was pushed to npm by qix, a new releaser for debug since your current version.

Updates tcp-port-used from 1.0.1 to 1.0.2

Commits

• f12c7a3 1.0.2
• 67c8429 Update deps
• See full diff in compare view

Updates nightwatch from 1.3.6 to 1.4.0

Release notes

Sourced from nightwatch's releases.

v1.4.0

This version significantly improves the network stability and performance of the test runner, by improving the underlying http retry mechanism and error detection and reporting of API commands – a particularly important update for when using cloud testing services.

Additionally, we have added better support for writing advanced custom commands to make it easier to extend Nightwatch, and improved support for using Nightwatch programmatically. See writing custom commands docs page.

The Developer Guide docs also have been updated.

Changelog:

• Added improved http request retry mechanism and better error reporting for api commands – a04162c6da76ea3576c6739cde61ae3b36940a63
• Added enhancements to assist in writing of custom commands – c977b164508eda3bd145d4d594749426785a7c8c
• Added abortOnElementLocateError global property to control if the testcase in progress should continue in the event of an element locate error (as a result of a click, getText, etc. command) – #2459
• Fixed an issue with merging the config settings when passed programmatically – #2483
• Fixed an issue where transport was set incorrectly for Chrome when using chromeOptions.w3c:true – d56a9db9e0a5a764bd96232ac859a40b7f69bf11
• Fixed an issue where the locator strategy was not taken into account when specifying first argument in a waitFor* command – #2446

• Fixed #2458 - implemented proper handling of 5xx server errors sometimes encountered during element commands, usually when using cloud testing services or selenium grid

v1.3.8

No release notes provided.

v1.3.7

Added new setting test_workers.node_options to enable passing node options to individual test worker processes. Usage:

• This will pass all of process.execArgv:

test_workers: {
    enabled: true,
    // automatically compute the number of workers based on CPU cores
    workers: 'auto',
    // pass node arguments to individual workers (all of the process.execArgv)
    node_options: 'inherit',
},

• This will pass only the specified cli options:

test_workers: {
    enabled: true,
    workers: 'auto',
    // selectively pass node arguments to individual worker processes
    node_options: ['--inspect']
},

Commits

• 793fcc4 1.4.0
• c977b16 Added some enhancements to assist in writing of custom commands
• d2918c4 #2483 - fixed an issue with merging the config settings when passed programma...
• 818f85d updated dependencies
• 5574b45 fixed linter
• 168ec8b updated unit tests
• 433bd4c updated api docs for perform
• a04162c Added improved http request retry mechanism and better error reporting for ap...
• 0b76aa5 Added improved protocol error handler for main transports
• a65f49e Check for locator strategy in waitFor* commands (#2471)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
  You can disable automated security fix PRs for this repo from the Security Alerts page.