RS: Fixed typos and links in develop Active-Active Redis apps docs

content/operate/rs/7.4/databases/active-active/develop/_index.md

@@ -19,9 +19,9 @@ of events under geo-failovers and cross-region write conflicts. In Redis Enterpr
 simplify developing such applications by directly using built-in smarts
 for handling conflicting writes based on the data type in use. Instead
 of depending on just simplistic "last-writer-wins" type conflict
-resolution, geo-distributed Active-Active databases (formerly known as CRDBs) combines techniques defined in CRDT
+resolution, geo-distributed Active-Active databases (formerly known as CRDBs) combine techniques defined in CRDT
 (conflict-free replicated data types) research with Redis types to
-provide smart and automatic conflict resolution based on the data types
+provide smart and automatic conflict resolution based on the data type's
 intent.
 
 An Active-Active database is a globally distributed database that spans multiple Redis
@@ -32,8 +32,8 @@ using the proven
 approach.
 [CRDT](https://en.wikipedia.org/wiki/Conflict-free_replicated_data_type)
 research describes a set of techniques for creating systems that can
-handle conflicting writes. CRDBs are powered by Multi-Master Replication
-(MMR) provides a straightforward and effective way to replicate your
+handle conflicting writes. CRDBs powered by Multi-Master Replication
+(MMR) provide a straightforward and effective way to replicate your
 data between regions and simplify development of complex applications
 that can maintain correctness under geo-failovers and concurrent
 cross-region writes to the same data.
@@ -43,14 +43,14 @@ cross-region writes to the same data.
 Active-Active databases replicate data between multiple Redis Enterprise Software
 clusters. Common uses for Active-Active databases include disaster recovery,
 geographically redundant applications, and keeping data closer to your
-user's locations. MMR is always multi-directional amongst the clusters
+users' locations. MMR is always multi-directional amongst the clusters
 configured in the Active-Active database. For unidirectional replication, please see the
 Replica Of capabilities in Redis Enterprise Software.
 
 ## Example of synchronization
 
-In the example below, database writes are concurrent at the point in
-times t1 and t2 and happen before a sync can communicate the changes.
+In the example below, database writes are concurrent at the points in
+time t1 and t2 and happen before a sync can communicate the changes.
 However, writes at times t4 and t6 are not concurrent as a sync happened
 in between.
 
@@ -64,5 +64,5 @@ in between.
 |  t6 |  | SET key1 “d” |
 
 [Learn more about
-synchronization]({{< relref "/operate/rs/7.4/databases/active-active" >}}) for
-each supported data type and [how to develop]({{< relref "/operate/rs/7.4/databases/active-active/develop/develop-for-aa.md" >}}) with them on Redis Enterprise Software.
+synchronization for
+each supported data type]({{< relref "/operate/rs/7.4/databases/active-active/develop/data-types/" >}}) and [how to develop applications]({{< relref "/operate/rs/7.4/databases/active-active/develop/develop-for-aa.md" >}}) with them on Redis Enterprise Software.

content/operate/rs/7.4/databases/active-active/develop/data-types/_index.md

@@ -8,7 +8,7 @@ categories:
 - rc
 description: Introduction to differences in data types between standalone and Active-Active
   Redis databases.
-hideListLinks: true
+hideListLinks: false
 linktitle: Data types
 weight: 90
 url: '/operate/rs/7.4/databases/active-active/develop/data-types/'
@@ -22,5 +22,5 @@ conflicting concurrent writes for each data type.
 
 As conflict handling rules differ between data types, some commands have slightly different requirements in Active-Active databases versus standard Redis databases.
 
-See the following articles for more information 
+See the following articles for more information.
 

content/operate/rs/7.8/databases/active-active/develop/_index.md

@@ -19,9 +19,9 @@ of events under geo-failovers and cross-region write conflicts. In Redis Enterpr
 simplify developing such applications by directly using built-in smarts
 for handling conflicting writes based on the data type in use. Instead
 of depending on just simplistic "last-writer-wins" type conflict
-resolution, geo-distributed Active-Active databases (formerly known as CRDBs) combines techniques defined in CRDT
+resolution, geo-distributed Active-Active databases (formerly known as CRDBs) combine techniques defined in CRDT
 (conflict-free replicated data types) research with Redis types to
-provide smart and automatic conflict resolution based on the data types
+provide smart and automatic conflict resolution based on the data type's
 intent.
 
 An Active-Active database is a globally distributed database that spans multiple Redis
@@ -32,8 +32,8 @@ using the proven
 approach.
 [CRDT](https://en.wikipedia.org/wiki/Conflict-free_replicated_data_type)
 research describes a set of techniques for creating systems that can
-handle conflicting writes. CRDBs are powered by Multi-Master Replication
-(MMR) provides a straightforward and effective way to replicate your
+handle conflicting writes. CRDBs powered by Multi-Master Replication
+(MMR) provide a straightforward and effective way to replicate your
 data between regions and simplify development of complex applications
 that can maintain correctness under geo-failovers and concurrent
 cross-region writes to the same data.
@@ -43,14 +43,14 @@ cross-region writes to the same data.
 Active-Active databases replicate data between multiple Redis Enterprise Software
 clusters. Common uses for Active-Active databases include disaster recovery,
 geographically redundant applications, and keeping data closer to your
-user's locations. MMR is always multi-directional amongst the clusters
+users' locations. MMR is always multi-directional amongst the clusters
 configured in the Active-Active database. For unidirectional replication, please see the
 Replica Of capabilities in Redis Enterprise Software.
 
 ## Example of synchronization
 
-In the example below, database writes are concurrent at the point in
-times t1 and t2 and happen before a sync can communicate the changes.
+In the example below, database writes are concurrent at the points in
+time t1 and t2 and happen before a sync can communicate the changes.
 However, writes at times t4 and t6 are not concurrent as a sync happened
 in between.
 
@@ -64,5 +64,5 @@ in between.
 |  t6 |  | SET key1 “d” |
 
 [Learn more about
-synchronization]({{< relref "/operate/rs/7.8/databases/active-active" >}}) for
-each supported data type and [how to develop]({{< relref "/operate/rs/7.8/databases/active-active/develop/develop-for-aa.md" >}}) with them on Redis Enterprise Software.
+synchronization for
+each supported data type]({{< relref "/operate/rs/7.8/databases/active-active/develop/data-types/" >}}) and [how to develop applications]({{< relref "/operate/rs/7.8/databases/active-active/develop/develop-for-aa.md" >}}) with them on Redis Enterprise Software.

content/operate/rs/7.8/databases/active-active/develop/data-types/_index.md

@@ -8,7 +8,7 @@ categories:
 - rc
 description: Introduction to differences in data types between standalone and Active-Active
   Redis databases.
-hideListLinks: true
+hideListLinks: false
 linktitle: Data types
 weight: 90
 url: '/operate/rs/7.8/databases/active-active/develop/data-types/'
@@ -22,5 +22,5 @@ conflicting concurrent writes for each data type.
 
 As conflict handling rules differ between data types, some commands have slightly different requirements in Active-Active databases versus standard Redis databases.
 
-See the following articles for more information 
+See the following articles for more information.
 

content/operate/rs/databases/active-active/develop/_index.md

@@ -18,9 +18,9 @@ of events under geo-failovers and cross-region write conflicts. In Redis Enterpr
 simplify developing such applications by directly using built-in smarts
 for handling conflicting writes based on the data type in use. Instead
 of depending on just simplistic "last-writer-wins" type conflict
-resolution, geo-distributed Active-Active databases (formerly known as CRDBs) combines techniques defined in CRDT
+resolution, geo-distributed Active-Active databases (formerly known as CRDBs) combine techniques defined in CRDT
 (conflict-free replicated data types) research with Redis types to
-provide smart and automatic conflict resolution based on the data types
+provide smart and automatic conflict resolution based on the data type's
 intent.
 
 An Active-Active database is a globally distributed database that spans multiple Redis
@@ -31,8 +31,8 @@ using the proven
 approach.
 [CRDT](https://en.wikipedia.org/wiki/Conflict-free_replicated_data_type)
 research describes a set of techniques for creating systems that can
-handle conflicting writes. CRDBs are powered by Multi-Master Replication
-(MMR) provides a straightforward and effective way to replicate your
+handle conflicting writes. CRDBs powered by Multi-Master Replication
+(MMR) provide a straightforward and effective way to replicate your
 data between regions and simplify development of complex applications
 that can maintain correctness under geo-failovers and concurrent
 cross-region writes to the same data.
@@ -42,14 +42,14 @@ cross-region writes to the same data.
 Active-Active databases replicate data between multiple Redis Enterprise Software
 clusters. Common uses for Active-Active databases include disaster recovery,
 geographically redundant applications, and keeping data closer to your
-user's locations. MMR is always multi-directional amongst the clusters
+users' locations. MMR is always multi-directional amongst the clusters
 configured in the Active-Active database. For unidirectional replication, please see the
 Replica Of capabilities in Redis Enterprise Software.
 
 ## Example of synchronization
 
-In the example below, database writes are concurrent at the point in
-times t1 and t2 and happen before a sync can communicate the changes.
+In the example below, database writes are concurrent at the points in
+time t1 and t2 and happen before a sync can communicate the changes.
 However, writes at times t4 and t6 are not concurrent as a sync happened
 in between.
 
@@ -63,5 +63,5 @@ in between.
 |  t6 |  | SET key1 “d” |
 
 [Learn more about
-synchronization]({{< relref "/operate/rs/databases/active-active" >}}) for
-each supported data type and [how to develop]({{< relref "/operate/rs/databases/active-active/develop/develop-for-aa.md" >}}) with them on Redis Enterprise Software.
+synchronization for
+each supported data type]({{< relref "/operate/rs/databases/active-active/develop/data-types/" >}}) and [how to develop applications]({{< relref "/operate/rs/databases/active-active/develop/develop-for-aa.md" >}}) with them on Redis Enterprise Software.

content/operate/rs/databases/active-active/develop/data-types/_index.md

@@ -8,7 +8,7 @@ categories:
 - rc
 description: Introduction to differences in data types between standalone and Active-Active
   Redis databases.
-hideListLinks: true
+hideListLinks: false
 linktitle: Data types
 weight: 90
 ---
@@ -21,5 +21,5 @@ conflicting concurrent writes for each data type.
 
 As conflict handling rules differ between data types, some commands have slightly different requirements in Active-Active databases versus standard Redis databases.
 
-See the following articles for more information 
+See the following articles for more information.