Merge #629

629: release 0.16 r=therealprof a=burrbull



Co-authored-by: Andrey Zgarbul <[email protected]>

.cargo/config.toml

@@ -0,0 +1,17 @@
+[target.thumbv7em-none-eabihf]
+runner = 'probe-run --chip STM32F411CEUx'
+rustflags = [
+  # `flip-link` moves stack at the end of flash
+  #"-C", "linker=flip-link",
+  "-C", "link-arg=-Tlink.x",
+  "-C", "link-arg=-Tdefmt.x",
+  # This is needed if your flash or ram addresses are not aligned to 0x10000 in memory.x
+  # See https://github.com/rust-embedded/cortex-m-quickstart/pull/95
+  #"-C", "link-arg=--nmagic",
+]
+
+[build]
+target = "thumbv7em-none-eabihf"
+
+[env]
+DEFMT_LOG = "info"

.github/workflows/ci.yml

@@ -45,7 +45,7 @@ jobs:
       - name: Cache Dependencies
         uses: Swatinem/rust-cache@v2
         with:
-          key: v0.14.0-${{ matrix.mcu }}
+          key: v0.16.0-${{ matrix.mcu }}
 
       - uses: actions-rs/cargo@v1
         with:

.github/workflows/clippy.yml

@@ -17,7 +17,7 @@ jobs:
       - name: Cache Dependencies
         uses: Swatinem/rust-cache@v2
         with:
-          key: v0.14.0
+          key: v0.16.0
 
       - uses: actions-rs/clippy-check@v1
         with:

CHANGELOG.md

@@ -7,24 +7,36 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [Unreleased]
 
- - Integrate new version of stm32_i2s (v0.4)
- - Fix mstr bit for SPI Master/Slave [#625]
+## [v0.15.0] - 2023-05-07
+
+
+### Changed
+
+ - Use `enum`s for alternate peripheral pins (generic over otype) [#594] [#596] [#600] [#610] [#617]
  - Add `ReadPin`, `PinSpeed` & `PinPull` traits [#623]
- - Add autoimplementations of `DMASet` [#614]
- - Simplify `gpio::Outport` [#611]
- - rcc `enable_unchecked`, timer features [#618]
- - Split SPI master and slave implementations [#609]
  - Split USART and UART implementations [#608]
- - Add `lapce` editor settings [#601]
- - Use `enum`s for alternate peripheral pins (generic over otype) [#594] [#596] [#600] [#610]
- - Add missing alternate enums [#617]
- - Added missing U(S)ART DMA traits for HAL serial types [#593]
+ - Split SPI master and slave implementations [#609]
+ - Simplify `gpio::Outport` [#611]
+ - Add autoimplementations of `DMASet` [#614]
+ - `ws2812::prerendered` in example [#615]
+ - Integrate new version of stm32_i2s (v0.4) [#626]
+
+### Added
+
  - Improve SPI::new* docs [#587]
  - Add advanced timer dead time insertion example [#585]
+ - Added missing U(S)ART DMA traits for HAL serial types [#593]
+ - I2c dma can now use single DMA channel for TX or RX only [#598]
+ - Improve SPI::new* docs [#587]
+ - Implement `serial::RxISR` for `dma::Transfer<..., PERIPHERAL, ...>` where `PERIPHERAL: serial::RxISR`, add `rtic-serial-dma-rx-idle` example [#588]
+ - Add `lapce` editor settings [#601]
+ - rcc `enable_unchecked`, timer features [#618]
+
+### Fixed
+
  - Cleanups [#595]
  - Fix comlementary for independent channels [#599] [#603]
- - I2c dma can now use single DMA channel for TX or RX only [#598]
- - `ws2812::prerendered` in example
+ - Fix mstr bit for SPI Master/Slave [#625]
 
 [#585]: https://github.com/stm32-rs/stm32f4xx-hal/pull/585
 [#593]: https://github.com/stm32-rs/stm32f4xx-hal/pull/593
@@ -39,17 +51,11 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 [#609]: https://github.com/stm32-rs/stm32f4xx-hal/pull/609
 [#611]: https://github.com/stm32-rs/stm32f4xx-hal/pull/611
 [#614]: https://github.com/stm32-rs/stm32f4xx-hal/pull/614
+[#615]: https://github.com/stm32-rs/stm32f4xx-hal/pull/615
 [#617]: https://github.com/stm32-rs/stm32f4xx-hal/pull/617
 [#618]: https://github.com/stm32-rs/stm32f4xx-hal/pull/618
 [#623]: https://github.com/stm32-rs/stm32f4xx-hal/pull/623
-### Changed
-
-### Added
-
- - Improve SPI::new* docs [#587]
- - Implement `serial::RxISR` for `dma::Transfer<..., PERIPHERAL, ...>` where `PERIPHERAL: serial::RxISR`, add `rtic-serial-dma-rx-idle` example [#588]
-
-### Fixed
+[#626]: https://github.com/stm32-rs/stm32f4xx-hal/pull/626
 
 ## [v0.15.0] - 2023-03-13
 
@@ -843,7 +849,8 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 - Support for stm32f407 and stm32f429.
 
-[Unreleased]: https://github.com/stm32-rs/stm32f4xx-hal/compare/v0.15.0...HEAD
+[Unreleased]: https://github.com/stm32-rs/stm32f4xx-hal/compare/v0.16.0...HEAD
+[v0.16.0]: https://github.com/stm32-rs/stm32f4xx-hal/compare/v0.15.0...v0.16.0
 [v0.15.0]: https://github.com/stm32-rs/stm32f4xx-hal/compare/v0.14.0...v0.15.0
 [v0.14.0]: https://github.com/stm32-rs/stm32f4xx-hal/compare/v0.13.2...v0.14.0
 [v0.13.2]: https://github.com/stm32-rs/stm32f4xx-hal/compare/v0.13.1...v0.13.2

Cargo.toml

@@ -20,19 +20,19 @@ license = "0BSD"
 name = "stm32f4xx-hal"
 readme = "README.md"
 repository = "https://github.com/stm32-rs/stm32f4xx-hal"
-version = "0.15.0"
+version = "0.16.0"
 
 [package.metadata.docs.rs]
 features = ["stm32f429", "usb_fs", "can", "i2s", "fsmc_lcd", "rtic", "defmt"]
 targets = ["thumbv7em-none-eabihf"]
 
 [dependencies]
-defmt = { version = "0.3.1", optional = true }
+defmt = { version = "0.3.4", optional = true }
 bxcan = { version = "0.7", optional = true }
-cortex-m = "0.7.4"
-cortex-m-rt = "0.7.1"
+cortex-m = { version = "0.7.7", features = ["critical-section-single-core"]}
+cortex-m-rt = "0.7.3"
 nb = "1.1"
-rand_core = "0.6.3"
+rand_core = "0.6.4"
 stm32f4 = "0.15.1"
 synopsys-usb-otg = { version = "0.3.2", features = ["cortex-m"], optional = true }
 sdio-host = { version = "0.6.0", optional = true }
@@ -45,7 +45,7 @@ fugit = "0.3.6"
 fugit-timer = "0.1.3"
 rtic-monotonic = { version = "1.0", optional = true }
 systick-monotonic = { version = "1.0", optional = true }
-bitflags = "1.3.2"
+bitflags = "2.2"
 embedded-storage = "0.2"
 
 [dependencies.time]
@@ -61,7 +61,7 @@ version = "0.4.0"
 optional = true
 
 [dev-dependencies]
-defmt = "0.3.2"
+defmt = "0.3.4"
 defmt-rtt = "0.4.0"
 panic-probe = { version = "0.3.0", features = [ "print-defmt" ] }
 panic-semihosting = "0.6.0"
@@ -73,11 +73,10 @@ embedded-graphics = "0.7.1"
 usb-device = "0.2.9"
 usbd-serial = "0.1.1"
 micromath = "2"
-cortex-m-rtic = "1.1.3"
+cortex-m-rtic = { version = "1.1.4", features = ["test-critical-section"] }
 dwt-systick-monotonic = "1.1"
 st7789 = "0.7.0"
-panic-rtt-target = { version = "0.1.2", features = ["cortex-m"] }
-rtt-target = { version = "0.3.1", features = ["cortex-m"] }
+rtt-target = { version = "0.4.0" }
 display-interface-spi = "0.4.1"
 ist7920 = "0.1.1"
 smart-leds = "0.3.0"
@@ -490,4 +489,3 @@ required-features = ["otg-fs", "usb_fs"] # stm32f401
 [[example]]
 name = "ws2812-spi"
 required-features = ["device-selected"]
-

README.md

@@ -94,7 +94,7 @@ cortex-m-rt = "0.7"
 panic-halt = "0.2"
 
 [dependencies.stm32f4xx-hal]
-version = "0.15.0"
+version = "0.16.0"
 features = ["stm32f407"] # replace the model of your microcontroller here
                          # and add other required features
 ```

examples/rtc.rs

@@ -6,7 +6,7 @@
 #![no_std]
 
 use cortex_m_rt::entry;
-use panic_rtt_target as _;
+use panic_halt as _;
 use rtt_target::{rprintln, rtt_init_print};
 
 use stm32f4xx_hal::{pac, prelude::*, rtc::Rtc};

src/i2s.rs

@@ -4,9 +4,8 @@
 
 use crate::gpio::{self, NoPin};
 use crate::pac;
-use crate::rcc;
-use crate::rcc::Clocks;
-use crate::rcc::Reset;
+#[allow(unused)]
+use crate::rcc::{self, Clocks, Reset};
 use fugit::HertzU32 as Hertz;
 
 #[cfg(feature = "stm32_i2s_v12x")]