software_challenge PR

CMakeLists.txt

@@ -0,0 +1,69 @@
+# toplevel CMakeLists.txt for a catkin workspace
+# catkin/cmake/toplevel.cmake
+
+cmake_minimum_required(VERSION 3.0.2)
+
+project(Project)
+
+set(CATKIN_TOPLEVEL TRUE)
+
+# search for catkin within the workspace
+set(_cmd "catkin_find_pkg" "catkin" "${CMAKE_SOURCE_DIR}")
+execute_process(COMMAND ${_cmd}
+  RESULT_VARIABLE _res
+  OUTPUT_VARIABLE _out
+  ERROR_VARIABLE _err
+  OUTPUT_STRIP_TRAILING_WHITESPACE
+  ERROR_STRIP_TRAILING_WHITESPACE
+)
+if(NOT _res EQUAL 0 AND NOT _res EQUAL 2)
+  # searching fot catkin resulted in an error
+  string(REPLACE ";" " " _cmd_str "${_cmd}")
+  message(FATAL_ERROR "Search for 'catkin' in workspace failed (${_cmd_str}): ${_err}")
+endif()
+
+# include catkin from workspace or via find_package()
+if(_res EQUAL 0)
+  set(catkin_EXTRAS_DIR "${CMAKE_SOURCE_DIR}/${_out}/cmake")
+  # include all.cmake without add_subdirectory to let it operate in same scope
+  include(${catkin_EXTRAS_DIR}/all.cmake NO_POLICY_SCOPE)
+  add_subdirectory("${_out}")
+
+else()
+  # use either CMAKE_PREFIX_PATH explicitly passed to CMake as a command line argument
+  # or CMAKE_PREFIX_PATH from the environment
+  if(NOT DEFINED CMAKE_PREFIX_PATH)
+    if(NOT "$ENV{CMAKE_PREFIX_PATH}" STREQUAL "")
+      if(NOT WIN32)
+        string(REPLACE ":" ";" CMAKE_PREFIX_PATH $ENV{CMAKE_PREFIX_PATH})
+      else()
+        set(CMAKE_PREFIX_PATH $ENV{CMAKE_PREFIX_PATH})
+      endif()
+    endif()
+  endif()
+
+  # list of catkin workspaces
+  set(catkin_search_path "")
+  foreach(path ${CMAKE_PREFIX_PATH})
+    if(EXISTS "${path}/.catkin")
+      list(FIND catkin_search_path ${path} _index)
+      if(_index EQUAL -1)
+        list(APPEND catkin_search_path ${path})
+      endif()
+    endif()
+  endforeach()
+
+  # search for catkin in all workspaces
+  set(CATKIN_TOPLEVEL_FIND_PACKAGE TRUE)
+  find_package(catkin QUIET
+    NO_POLICY_SCOPE
+    PATHS ${catkin_search_path}
+    NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+  unset(CATKIN_TOPLEVEL_FIND_PACKAGE)
+
+  if(NOT catkin_FOUND)
+    message(FATAL_ERROR "find_package(catkin) failed. catkin was neither found in the workspace nor in the CMAKE_PREFIX_PATH. One reason may be that no ROS setup.sh was sourced before.")
+  endif()
+endif()
+
+catkin_workspace()

README.md

@@ -1 +1,14 @@
-# software_challenge
+# software_challenge
+
+## Usage:
+1. Add package to your workspace, `cd` into your workspace, run `source ./devel/setup.bash`, `catkin_make`
+2. Start the turtlesim and my_turtle nodes by running:
+	`roslaunch software_training_assignment launcher.launch`
+3. To use the reset "moving_turtle" service run:
+	`rosservice call /reset_moving_turtle`
+4. To get information about the distances between the "stationary_turtle" and "moving_turtle" run:
+	`rostopic echo /turtle_distance`
+5. To use the "moving_turtle" action run:
+	`rosrun software_training_assignment MoveTurtleActionTester _x:=2 _y:=5`
+
+Replace the x and y parameters to whatever you would like to move the "moving_turtle".

software_training_assignment/CMakeLists.txt

@@ -0,0 +1,226 @@
+cmake_minimum_required(VERSION 3.0.2)
+project(software_training_assignment)
+
+## Compile as C++11, supported in ROS Kinetic and newer
+add_compile_options(-std=c++11)
+
+## Find catkin macros and libraries
+## if COMPONENTS list like find_package(catkin REQUIRED COMPONENTS xyz)
+## is used, also find other catkin packages
+find_package(catkin REQUIRED COMPONENTS
+	roscpp
+	rospy
+	turtlesim
+	std_msgs
+	message_generation
+	actionlib
+	actionlib_msgs
+)
+
+## System dependencies are found with CMake's conventions
+# find_package(Boost REQUIRED COMPONENTS system)
+
+
+## Uncomment this if the package has a setup.py. This macro ensures
+## modules and global scripts declared therein get installed
+## See http://ros.org/doc/api/catkin/html/user_guide/setup_dot_py.html
+# catkin_python_setup()
+
+################################################
+## Declare ROS messages, services and actions ##
+################################################
+
+## To declare and build messages, services or actions from within this
+## package, follow these steps:
+## * Let MSG_DEP_SET be the set of packages whose message types you use in
+##   your messages/services/actions (e.g. std_msgs, actionlib_msgs, ...).
+## * In the file package.xml:
+##   * add a build_depend tag for "message_generation"
+##   * add a build_depend and a exec_depend tag for each package in MSG_DEP_SET
+##   * If MSG_DEP_SET isn't empty the following dependency has been pulled in
+##     but can be declared for certainty nonetheless:
+##     * add a exec_depend tag for "message_runtime"
+## * In this file (CMakeLists.txt):
+##   * add "message_generation" and every package in MSG_DEP_SET to
+##     find_package(catkin REQUIRED COMPONENTS ...)
+##   * add "message_runtime" and every package in MSG_DEP_SET to
+##     catkin_package(CATKIN_DEPENDS ...)
+##   * uncomment the add_*_files sections below as needed
+##     and list every .msg/.srv/.action file to be processed
+##   * uncomment the generate_messages entry below
+##   * add every package in MSG_DEP_SET to generate_messages(DEPENDENCIES ...)
+
+## Generate messages in the 'msg' folder
+add_message_files(
+  FILES
+  Distance.msg
+)
+
+## Generate services in the 'srv' folder
+add_service_files(
+  FILES
+  ResetMovingTurtle.srv
+)
+
+## Generate actions in the 'action' folder
+add_action_files(
+  DIRECTORY action
+  FILES
+  MoveTurtle.action
+)
+
+## Generate added messages and services with any dependencies listed here
+generate_messages(
+  DEPENDENCIES
+  std_msgs
+  actionlib_msgs
+)
+
+################################################
+## Declare ROS dynamic reconfigure parameters ##
+################################################
+
+## To declare and build dynamic reconfigure parameters within this
+## package, follow these steps:
+## * In the file package.xml:
+##   * add a build_depend and a exec_depend tag for "dynamic_reconfigure"
+## * In this file (CMakeLists.txt):
+##   * add "dynamic_reconfigure" to
+##     find_package(catkin REQUIRED COMPONENTS ...)
+##   * uncomment the "generate_dynamic_reconfigure_options" section below
+##     and list every .cfg file to be processed
+
+## Generate dynamic reconfigure parameters in the 'cfg' folder
+# generate_dynamic_reconfigure_options(
+#   cfg/DynReconf1.cfg
+#   cfg/DynReconf2.cfg
+# )
+
+###################################
+## catkin specific configuration ##
+###################################
+## The catkin_package macro generates cmake config files for your package
+## Declare things to be passed to dependent projects
+## INCLUDE_DIRS: uncomment this if your package contains header files
+## LIBRARIES: libraries you create in this project that dependent projects also need
+## CATKIN_DEPENDS: catkin_packages dependent projects also need
+## DEPENDS: system dependencies of this project that dependent projects also need
+catkin_package(
+	# INCLUDE_DIRS include
+	# LIBRARIES software_training_assignment
+	CATKIN_DEPENDS message_runtime actionlib_msgs
+	# DEPENDS system_lib
+)
+
+###########
+## Build ##
+###########
+
+## Specify additional locations of header files
+## Your package locations should be listed before other locations
+include_directories(
+    include
+    /src
+    ${catkin_INCLUDE_DIRS}
+)
+
+## Declare a C++ library
+# add_library(${PROJECT_NAME}
+#   src/${PROJECT_NAME}/software_training_assignment.cpp
+# )
+
+## Add cmake target dependencies of the library
+## as an example, code may need to be generated before libraries
+## either from message generation or dynamic reconfigure
+# add_dependencies(${PROJECT_NAME} ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})
+
+## Declare a C++ executable
+## With catkin_make all packages are built within a single CMake context
+## The recommended prefix ensures that target names across packages don't collide
+# add_executable(${PROJECT_NAME}_node src/software_training_assignment_node.cpp)
+
+## Rename C++ executable without prefix
+## The above recommended prefix causes long target names, the following renames the
+## target back to the shorter version for ease of user use
+## e.g. "rosrun someones_pkg node" instead of "rosrun someones_pkg someones_pkg_node"
+# set_target_properties(${PROJECT_NAME}_node PROPERTIES OUTPUT_NAME node PREFIX "")
+
+## Add cmake target dependencies of the executable
+## same as for the library above
+# add_dependencies(${PROJECT_NAME}_node ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})
+
+## Specify libraries to link a library or executable target against
+# target_link_libraries(${PROJECT_NAME}_node
+#   ${catkin_LIBRARIES}
+# )
+
+set(SOURCE_FILES
+  src/main.cpp
+  src/Turtle.cpp
+  src/StationaryTurtle.cpp
+  src/MovingTurtle.cpp
+  src/DistancePublisher.cpp
+)
+
+add_executable(my_turtle ${SOURCE_FILES})
+target_link_libraries(my_turtle ${catkin_LIBRARIES})
+add_dependencies(my_turtle software_training_assignment_generate_messages_cpp)
+
+add_executable(MoveTurtleActionTester src/MoveTurtleActionTester.cpp)
+target_link_libraries(MoveTurtleActionTester ${catkin_LIBRARIES})
+add_dependencies(MoveTurtleActionTester software_training_assignment_generate_messages_cpp)
+
+#############
+## Install ##
+#############
+
+# all install targets should use catkin DESTINATION variables
+# See http://ros.org/doc/api/catkin/html/adv_user_guide/variables.html
+
+## Mark executable scripts (Python etc.) for installation
+## in contrast to setup.py, you can choose the destination
+# catkin_install_python(PROGRAMS
+#   scripts/my_python_script
+#   DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+# )
+
+## Mark executables for installation
+## See http://docs.ros.org/melodic/api/catkin/html/howto/format1/building_executables.html
+# install(TARGETS ${PROJECT_NAME}_node
+#   RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+# )
+
+## Mark libraries for installation
+## See http://docs.ros.org/melodic/api/catkin/html/howto/format1/building_libraries.html
+# install(TARGETS ${PROJECT_NAME}
+#   ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   RUNTIME DESTINATION ${CATKIN_GLOBAL_BIN_DESTINATION}
+# )
+
+## Mark cpp header files for installation
+# install(DIRECTORY include/${PROJECT_NAME}/
+#   DESTINATION ${CATKIN_PACKAGE_INCLUDE_DESTINATION}
+#   FILES_MATCHING PATTERN "*.h"
+#   PATTERN ".svn" EXCLUDE
+# )
+
+## Mark other files for installation (e.g. launch and bag files, etc.)
+# install(FILES
+#   # myfile1
+#   # myfile2
+#   DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
+# )
+
+#############
+## Testing ##
+#############
+
+## Add gtest based cpp test target and link libraries
+# catkin_add_gtest(${PROJECT_NAME}-test test/test_software_training_assignment.cpp)
+# if(TARGET ${PROJECT_NAME}-test)
+#   target_link_libraries(${PROJECT_NAME}-test ${PROJECT_NAME})
+# endif()
+
+## Add folders to be run by python nosetests
+# catkin_add_nosetests(test)

software_training_assignment/action/MoveTurtle.action

@@ -0,0 +1,9 @@
+# goal definition
+float32 x
+float32 y
+---
+# result definition
+duration time
+---
+# feedback
+float32 distance

software_training_assignment/launch/launcher.launch

@@ -0,0 +1,11 @@
+<launch>
+
+    <node name="turtlesim" pkg="turtlesim" type="turtlesim_node">
+      <rosparam param="background_r">128</rosparam>	
+      <rosparam param="background_g">128</rosparam> 
+      <rosparam param="background_b">0</rosparam>
+    </node>
+
+    <node name="my_turtle" pkg="software_training_assignment" type="my_turtle" output="screen" />
+
+</launch>

software_training_assignment/msg/Distance.msg

@@ -0,0 +1,4 @@
+float32 x
+float32 y
+
+float32 distance