pdu dell dell

Dell PDU

Standard Base Configuration

• Run a network cable from the PDU into a pooled DHCP network
• Power on the PDU and wait for it to boot
• Once the PDU is booted it will show the load on the LCD screen
• Press and hold the button on the PDU until the LCD displays “IP”
• Note the IP displayed on the LCD screen
• Navigate to IP given in web browser
• Log in with admin / admin
• Apply the following configuration:

Administration -> Security -> Local Users -> Administrator -> Change default password

Administration -> General -> Identification -> Set name

Administration -> Network -> IPV4 Configuration -> Set to Manual, then assign IP for PDU and set
Subnet Mask and Gateway

• Save changes and reboot pdu to test settings have been applied correctly
• Note PDU details / configuration on a generic customer asset sheet